Structural Urethane Adhesives | division English sites
jet ski on water

当社のウレタン系構造用接着剤は、さまざまな熱可塑性プラスチックや複合材料、さらに布、発泡体、木材などの接着が困難な基材への接着に優れた選択肢です。また、金属に下地処理またはコーティングを施した金属接合用途にも使用できます。当社のウレタン系接着剤は低臭で、硬化時間は速いものから遅いものまであり、高い靭性、強度、柔軟性を兼ね備えているため、軽量アセンブリと構造アセンブリの両方の接合に理想的な選択肢となっています。

お問合せメール: NVH092GAInfoJapan@parker.com

Substrates for Urethane Bonding Adhesives

Below is a list of substrates that can be bonded using urethane adhesives.

  • Composites 
  • Plastics
  • Coated Metals
  • Foams
  • Textiles
  • Reinforced Thermoplastics
  • Glass
  • Rubber
  • Ceramic/Stone
  • Wood

Benefits of Using Urethane Adhesives

Below are the reasons why you might prefer urethane adhesives over other adhesive options.

  • Multiple work times and cure speeds to meet application requirements 
  • High elongation
  • Bonds to dissimilar materials
  • No odor, environmentally recommended 
  • Specialty versions to meet application requirements:
  • Resist sunlight (non-yellowing)
  • Optically clear, translucent, bright white color options
  • Formulas for precise, small beads and large beads
  • Excellent adhesion on numerous composites without pre-abrasion (ex: SMC)
  • Temperature resistance within their category
 


Product                      

Description   

Work  Time

Handling    Time    

High Strength Structural Bonding 7800 Bonds composites, SMC, plastics and prepared metals, rapid strength development, excellent sag resistance and gap filling capability, low exotherm, high elongation, free of heavy metals, environmentally recommended. 2-4.5 min/ 4-8 min 12 min/ 25 min
7542 Structural bond to FRP, SMC and other plastics and prepared metals with minimal surface preparation, lower viscosity, suitable for gravity fed MMD, wide range of work times, non-sag paste, non-flammable, environment and chemical resistant, UL 746C certified. 4-7 min/ 11-15 min/ 20-30 min/ 50-60 min 1-2 hr/ 2 hr/ 3 hr/ 4 hr
7545 Structural bond to FRP, SMC and other plastics and prepared metals with minimal surface preparation, non-sag, remains in position on vertical and overhead surfaces, Non-flammable, environmental and chemical resistant. 3-5 min/ 6-8 min/ 11-18 min/ 22-38 min/ 45-65 min 10 min/ 30 min/ 60 min/ 1-1.5 hr/ 2-3 hr/ 4-5 hr
Specialty Bonding and Sealing 7550

Non-structural bond to Lexan®, ABS, polycarbonate, other plastics and primed metals, Optically clear, self-leveling, flows into hard-to-reach spaces, excellent for bonding parts with tight tolerances, non-yellowing.

3-5 min 1 hr
7555 Bonds and seals plastics and prepared metals, non-sag, paint and finish quickly, non-yellowing, UV and chemical resistant, formulated for auto/truck bond and seal and clean rooms. 3-5 min/ 45 min 1 hr/ 5-6 hr
7556 Bonds to Lexan, ABS, polycarbonate, other plastics and primed metals, translucent, non-sag, environmental and chemical resistant. 3-5 min/ 4-6 min 1 hr/ 1.5-2.3 hr
7100 High strength, high elongation formulated for cloth, paper, foams, rubbers and plastics, bonds plastics without crazing, attacking or lowering strength of plastics, self leveling, low viscosity, no VOC content, environmental and solvent resistant. 5-10 min 2-3 hr
7150 5-10 min 2-3 hr
Single Component 7602 Single-component, formulated for excellent adhesion to various plastics, wood, fabrics, cured elastomers, and prepared metals including precoated steel. 10-20 min 24 hr
7610DTM Single-component, direct-to-metal adhesive/sealant for plastic, wood, fabrics and metals, non-sag, resistant to indirect UV exposure, 15 month shelf life, can finish immediately before skinning over. 25-35 min 6-12 hr
7650 Single-component, formulated for open cell polyethylene foam, styrofoam, HD urethane foam, plastic, fabric, rubber and prepared metal, high-tack, low viscosity, good impact resistance, suitable for laminating 15-30 min 24 hr