Wind Energy | division English sites
Parker Image

構造用接着剤の開発と製造において 60 年以上の経験を持つ当社のアクリル系、エポキシ系、ウレタン系接着剤の広範な製品ラインは、風力タービンのコンポーネントの強度、耐久性、外観を向上させると同時に、設計の柔軟性、総コストの削減、耐食性、および耐食性を提供します。 異なる素材を接合します。 当社の接着剤は室温で硬化するため、さまざまな複合材料、金属、プラスチックのアセンブリに適しています。

お問合せメール: NVH092GAInfoJapan@parker.com

Structural Adhesives for Wind Turbine Applications

Structural adhesives are applicable to a variety of wind turbine structure components including:

  • Blade assembly
    • Blade bonding
    • Void filling
    • Bolt, stud, and metal-insert fixing
    • Panel and stringer structural bonding
  • Nacelle assembly
  • Hub, bearing, and gearbox assembly
  • Electrical component sealing and protection
  • Magnet bonding and coatings
  • Tower assembly
  • Installation, maintenance, and blade repair
wind blade call outs
wind blade call outs

Cure Time Critical to Blade Bonding

Curing times are a crucial aspect of bonding. Some applications require adhesives that cure quickly, such as repair operations, while other applications need a slower cure time, as in manufacturing.

Large wind blades, for one, need a slower cure time. When bonding the two blade halves and laying down beads of adhesives, it's good to have a curing process begin at the same time. An adhesive should not start curing before all of it is applied to the entire blade. When the dispensing finishes, the two halves are placed together, and the curing can commence. Curing at room temperature lets the adhesives provide crack resistance for a variety of composite, metal, and plastic assemblies.

Engineering assistance is available for joint design, fixturing recommendations, adhesive selection, and MMD (bulk dispensing) equipment guidance. If you need help choosing one of our standard adhesive products or if they don’t quite meet your needs, let us help you find a solution.