??? ??? ??? ???? ?? ? ???? ??? ?????. ?? ???? ?? ???? ?? ? ????? ???? ??? ??? ??? ??? ?? ?? ??? ????? 개인 정보 보호 정책. 쿠키 관리 방법을 포함한 더 많은 정보 배우기   여기를 클릭하십시오..

Parflex Division

Parflex Division - Mobile Equipment Hydraulic Thermoplastic Hose
687563:MARKETS

Mobile Equipment Hydraulic Thermoplastic Hose

Parflex's thermoplastic hose assemblies for lubrication systems and diagnostic lines are inherently resistant to pin-hole leaks making the mobile equipment that use them more reliable than ever. These hydraulic hoses are compact, have a tight bend radius, low force to flex, are light weight and have a core tube that is compatible with a large variety of media. They also reduce noise and dampen chatter. > View the Whitepaper

It's hard to match the costs saving value of Parflex hose. Parflex creates this savings by supplying formed and harnessed hose and tubing, some of which simply snap into place. These ready to go products reduce inventory complexity, scrap and installation time because they are formed to fit their application. In addition, being formed to fit reduces the need for fittings which reduces leak points and the overall weight added to mobile equipment. > View the Whitepaper

Some of our biggest success stories come from:

  • Lubrication Lines
  • Pilot Lines
  • DEF Transfer
  • Diagnostic Applications
  • Reduced Noise Hydraulic Hose
  • Over-the-Sheave Applications


 



 

Parker Mobile Hydraulic Lubrication Lines

 

Lubrication Lines

Parflex's lubrication hose (HLB) and diagnostic hose (56DH) with integrated bulkhead connections make assembly and maintenance a snap, almost literally. With typical applications sizes of 1/8-inch I.D., customers and end users have more available space, less weight, less grease (3x less), and less mess. Easier to service equipment means equipment is better maintained and, most importantly, kept to doing the work instead of being worked on.

Download the brochure


 

Parker HLB Lubrication Hose

HLB Lubrication Hose

HLB flexible grease hose is a cost effective way to make sure your application is getting properly lubricated. Historical data has shown that using an HLB remote hose, versus a 1/4" rubber hose, can save $10 to $20 per line in reduced component and installation labor costs.

• HLB remote lubrication system versus 1/4" rubber hoses can save money per line in reduced component and installation labor costs
• Unique GK bulkhead hose fittings with integrated nipple can save money per zerk connection in unnecessary adapter costs
• Compact 1/8" hoses save hundreds of dollars of waste in your operation by eliminating gallons of unnecessary "in-line" grease versus larger bore rubber hoses
• MSHA accepted
• 3,000 constant psi
• Size range: 1/8 and 3/16 (3 mm and 5 mm)

> Learn more about HLB Lubrication Hose.


 

Parker Pilot Lines / Diagnostic Applications

Pilot Lines / Diagnostic Applications

Parflex hoses can reduce installation times when working in difficult-to-reach areas such as hydraulic joystick ports. When used with push-to-connect ends, assemblies quickly snap into place, reducing the chance for misalignment and lowering installation costs. And when taken to the next level, installing a formed harness, customers achieved a system that was up to 60% lighter than traditional pilot line hose assemblies. This weight savings also reduced annual shipping costs and vehicle weight.


 

Parker 515H Compact Hose

515H Compact Hose

Parker hose 515H thermoplastic hose features a reduced O.D. and tighter bend radius that can transport the same flow capacity as a large diameter hose. Twin or multi-line constructions available.

• Uses rapid assembly (quick connect) fittings
• MSHA accepted
• 1,500 - 2,000 psi
• Size range: 1/4" or 3/8" (6.4 mm and 9.5 mm)

> Learn more about 515H Compact Hose.


 

Parker 56DH Diagnostic Hose

56DH Diagnostic Hose

Parflex 56DH Diagnostic Hose is a lightweight hose rated for 6,000 psi. It is designed for diagnostic equipment and hydraulic and pneumatic systems where a small O.D. is desired. Twin or multi-line constructions available.

• MSHA accepted for -2
• 6,000 constant psi
• Size range: 090" and .140" (2.3 mm and 3.6 mm)

> Learn more about 56DH Diagnostic Hose.


 

Parker DEF Transfer

DEF Transfer - SCR Heated Hoses

Parflex is an innovator in Tier IV compliant SCR Hose for on-vehicle DEF (diesel exhaust fluid) transfer. Our hoses are used on heavy duty trucks, buses, excavators, harvesters, logging equipment, lift trucks and other application specific equipment. SCR hoses are heated hoses designed for heating and conveying DEF throughout the SCR (selective catalytic reduction) system on commercial vehicles. The patented design of the heated fitting eliminates problems associated with low ambient temperatures, such as condensation.

>View the website or >download the video.


 

Parker Hydraulic Hoses that Reduce Noise

Hydraulic Hoses that Reduce Noise

Parflex thermoplastic hydraulic hoses are inherently light weight compared to their rubber counter parts (up to 70% lighter). Listed below are more of their distinguishing features.

• Compact O.D. - 10% - 30% reduction for easier routing without reducing flow
• Clean core tube, resistant to pin hole leaks
• Low length change under pressure
• Long continuous lengths
• Available as a bonded assemblies - helps reduce the twist that occurs due to offset end connections and controls/eliminates abrasion damage

> View the full line of hydraulic hoses.


 

Parker 520N Thermoplastic Hydraulic Hose

520N Thermoplastic Hydraulic Hose 5000 psi

Parflex 520N thermoplastic hydraulic hose is a high pressure hose that meets SAE 100R8 and replaces rubber hose wherever greater flexibility, fluid compatibility, and cover durability are required. This flexible hose is available in twinline and multi-line constructions.

• Reduces vibration, noise and chatter
• SAE 100R8 compliant and MSHA accepted
• 3,500 to 5,000 psi
• Size range: 3/16", 1/4", 5/16", 3/8", 1/2" (5, 6, 8, 10, 13 mm)
• Available in static-dissipative design

> Learn more about 520N Hose.


 

Parker 540N Hydraulic Hose

540N Hydraulic Hose

Parlex 540N hydraulic hose is one of the most popular thermoplastic hoses Parker offers. Because of it's excellent chemical compatibility, 540N hoses are able to convey a wide variety of fluids, gasses and other media. It is also available as a twinline hose.

• Matte cover for low coefficient of friction
• Good chemical compatibility
• SAE 100R7 compliant and MSHA accepted
• 1,250 to 3,000 psi
• Size range: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 3/4"
(3, 5, 6, 8, 10, 13, 19 mm)

> Learn more about 540N Hose.


 

Parker Hydraulic Hoses - Cold Weather Reliability

Hydraulic Hoses - Cold Weather Reliability

When it comes to better performance, flexibility is just as important in hose construction as it is in sports. But when it comes to "cold weather" performance, force to flex is not as important as freeze-resistant hose construction. In the harsh temperatures of winter, hose materials and construction can be a major contributor to hose failures. Cold temperatures coupled with UV rays can dry out the hose core and jacket, making the materials brittle and prone to cracking.

> Continue reading...


 

Parker H6 Hydraulic Hose 3,000 psi

H6 Hydraulic Hose 3,000 psi

• Largest temperature range
• SAE 100R17 compliant
• 3,000 constant psi
• Size range: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"
(6, 8, 10, 13, 16, 19 mm)
• Temperature Range: -70°F/-57°C to +250°F/121°C

> Learn more about H6 Hydraulic Hose 3,000 psi.


 

Parker Abrasion Resistant R6 Hose

Abrasion Resistant R6 Hose

• Best abrasion resistance
• SAE 100R7 compliant
• 2,000 - 3,000 psi
• Size range: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2"
(3, 5, 6, 8, 10, 13 mm)
• Temperature Range: -50°F/-45°C to +250°F/121°C

> Learn more about Abrasion Resistant R6 Hose.


 

Parker 53DM Low Temperature Hydrualic Hose

53DM Low Temperature Hydraulic Hose

• Tightest bend radius
• SAE 100R18 compliant
• 3,000 constant psi
• Size range: 1/4", 3/8", 1/2", 5/8", 3/4"
(6, 10, 13, 16, 19 mm)
• Temperature Range: -70°F/-57°C to +212°F/100°C

> Learn more about 53DM Low Temperature Hydraulic Hose.


 

Parker 55LT Low Temperature Hose

55LT Low Temperature Hose

• Best flexibility
• SAE 100R7 compliant
• 2,000 - 3,250 psi
• Size range: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2"
(3, 5, 6, 8, 10, 13 mm)
• Temperature Range: -70°F/-57°C to +212°F/100°C

> Learn more about 55LT Low Temperature Hose.


 

Parker Mast Hose, Over-The-Sheave

Mast Hose, Over-The-Sheave

Most material handling OEM's use thermoplastic hose in their masts from the factory which have sheaves sized specifically to fit the hose they install. So when considering replacing the hose it is important to consider the sheave width if you are using rubber hoses as they have much larger outside diameters. A larger hose OD will cause additional wear on the hose as it passes thought the sheave resulting shortened life expectancy of the hose.

> Learn more about Parflex Over-The-Sheave hoses.


 

Parker Hannifin Corporation
Parflex Division
1300 N Freedom Street
Ravenna, OH 44266 USA
Ph: +1 (330) 296-2871
Fax: +1 (330) 296-8433
pfd_support@support.parker.com