??? ??? ??? ???? ?? ? ???? ??? ?????. ?? ???? ?? ???? ?? ? ????? ???? ??? ??? ??? ??? ?? ?? ??? ????? 개인 정보 보호 정책. 쿠키 관리 방법을 포함한 더 많은 정보 배우기   여기를 클릭하십시오..

Parflex Division

Parflex Division - Military
687563:MARKETS

Military

Parker Parflex reinforced thermoplastic hydraulic hoses can reduce weight by up to 70% when compared to steel tubing or traditional wire-reinforced rubber hose. By reducing the overall weight of the fluid conveyance system, critical payload weight can be optimized. On a recent military application, Parflex thermoplastic hose reduced weight by 27.5 pounds (39% reduction). Parflex also makes a large selection of fluoropolymer tubing and heat shrinkable tubing to meet AMS and MIL specifications.

 


 

563TJ SAE 100R17 Hydraulic Hose

Up to 42% lighter than comparables with 650x abrasion resistance of standard rubber hose. Lowest length change under pressure.

• 3,000 constant psi
• Size Range: 1/4" to 1/2"
• Temperature Range: -40°F/-40°C to +250°F/121°C
• Lowest length change under pressure (+/-1%)
Smaller O.D. and up to 42% lighter than 100R17 hose

> Learn more about 563TJ SAE 100R17 Hydraulic Hose

 

 

594TJ SAE 100R19 Hydraulic Hose

594TJ SAE 100R19 Hydraulic Hose

Two wire strength, one wire construction with 650x abrasion resistance of standard rubber hose. Long continuous lengths.

• 4,000 constant psi
• Size Range: 1/4" to 5/8"
• Temperature Range: -40°F/-40°C to +212°F/100°C
• Four-spiral wire hose performance in a high tensile two-wire braid construction

> Learn more about 594TJ SAE 100R19 Hydraulic Hose

 

 

H6 Series SAE 100R17 Hydraulic Hose

H6 Series SAE 100R17 Hydraulic Hose

Largest temperature range in medium pressure hose with low length change under pressure.

• 3,000 constant psi
• Size Range: 1/4" to 3/4"
• Temperature Range:-70°F/-57°C to +212°F/121°C
• Low length change under pressure
• MSHA accepted

> Learn more about H6 Series SAE 100R17 Hydraulic Hose

 

 

53DM SAE 100R18 Hydraulic Hose

53DM SAE 100R18 Hydraulic Hose

Superior flexibility in cold temperatures. Smaller O.D. than 100R7 or 100R18.

• 3,000 constant psi
• Size range: 1/4" to 3/4"
• Temperature range: -70°F/-57°C to +212°F/100°C
• Better bend radius than SAE J517 and 100R7
• Low coefficient of friction cover
• Available in static dissipative design

> Learn more about 53DM SAE 100R18 Hydraulic Hose

 

 

520N SAE 100R18 Hydraulic Hose

520N SAE 100R18 Hydraulic Hose

Fast response. Lighter and smaller O.D. than 100R2. Twin-line and multi-line available.

• 2,750 to 5,000 psi
• Size Range: 3/16" to 1/2"
• Temperature Range: -70°F/-57°C to +212°F/100°C
• MSHA accepted

> Learn more about 520N SAE 100R18 Hydraulic Hose

 

 

 

2370N High Pressure Hydraulic Hose

2370N High Pressure Hydraulic Hose

High pressure service.

• 4,350 to 6,740 psi
• Size Range: 1/4" to 3/4"
• Temperature Range: -70°F/-57°C to +212°F/100°C

> Learn more about 2370N High Pressure Hydraulic Hose

 

 

 

575X SAE100R7 Fast Response/Constant Pressure Hose

575X SAE100R7 Fast Response/Constant Pressure Hose

Low length change under pressure. Low volumetric expansion.

• 5,000 constant psi
• Size Range: 3/16" to 1"
• Temperature Range: -40°F/-40°C to +212°F/100°C
• MSHA accepted

> Learn more about 575X SAE100R7 Fast Response/Constant Pressure Hose

 

 

 

Parflex works closely with the U.S. military to deliver reliable hoses

PARFLEX CUSTOM HOSE & TUBING

Parflex works closely with the U.S. military to deliver the most robust and reliable hoses available. Not just in war torn areas, but also on our homefront. As partners, we work to keep America safe, even when the elements are working against us.

 

 

 

 

Formed Hose

Formed Hose

Parflex formed hydraulic hoses allow for cleaner routings and the repeatability of the manufacturing assembly process by providing a consistently formed hose or tube to fit into a specific position every time. They have a set memory once formed and will spring back to the original form. This allows for a reduction in packaging size, weight and freight costs.

• Diminishes the chance for misalignment
• Improved process and overall efficiency of installation
• Part numbers and thread joints reduced
• Component weight reduced due to component elimination
• Rigid but flexible

> Download the whitepaper to find out how to reduce quality issues in your operation.

 

 

 

Diesel Fuel Tubing

Diesel Fuel Tubing

Polyethylene is widely used with pneumatics and its semi-rigid nature permits use with push to connect fittings without clamps. Parker polyethylene (PE) tubing is produced from a high molecular weight resin to provide increased dimensional stability, uniformity and long-term strength.

• Heat and light stabilized
• 100% quality controlled - 100% pressure tested
• Can reduce installation cost by saving weight
  and labor in comparison with hose and hard-line tubing
• Preformed tubes are available for quicker installation

> Learn more about Diesel Fuel Tubing

 

 

 

Air Brake Harnesses/Formed Tubing

Air Brake Harnesses/Formed Tubing

Parflex preformed harnesses and bundles for cab title lines, gear shifts, hydraulic steering, airbrake and diesel fuel applications can reduce installation times by more than 70%. Time studies have shown customers saving up to Like formed products, harnessess allow for repeatability of the manufacturing assembly process. Preformed parts also allow customers to free up employees who were once cutting and installing to work in other bottleneck areas, thus increasing overall throughput.

Less Scrap - Customers that use harnesses can see
  5% to 8% reduction in scrap
Defined Routings - Provides standard work for all
  vehicles a company makes and routes around abrasion points
Reduced installation time - Realize greater than 50%
  improvement in installation time
Part number reduction - Stock less bulk tubing
  reducing inventory needed

> Learn more about Air Brake Harnesses/Formed Tubing

 

 

 

AMS-DTL-23053 Heat Shrinkable Tubing

AMS-DTL-23053 Heat Shrinkable Tubing

Parflex high temperature heat shrink operates in temperatures as high as 5007°F (260°C) and supplied in an expanded state, allowing easy slippage over instruments, fittings and other protrusions.

> Learn more about AMS-DTL-23053 Heat Shrinkable Tubing

AMS-DTL-23053/11A, FEP 1.3/1 and FEP 1.67/1
  Class 1 - 1.3/1 Heat Shrink, HS1.3FEP
  Sizes 3/8" to 1-1/2"; AWG 24 - AWG 0

  Class 2 - 1.67/1 Heat Shrink, HS1.6FEP
  Sizes 3/32" to 2"

AMS-DTL-23053/12A, PTFE 2:1
  Class 1 - Industrial Wall, HS2TFI
  Sizes 1/8" to 1"

  Class 2 - Fractional & Spaghetti, Standard Wall, HS2TFS
  Sizes 1/8" to 1";AWG 24 - AWG 0

  Class 3 - Fractional & Spaghetti, Thin Wall, HS2TFT
  Sizes 1/8" to 1"; AWG 30 - AWG 0

  Class 4 - Fractional & Spaghetti, Light Wall, HS2TFL
  Sizes 1/8" to 5/16"; AWG 24 - AWG 0

AMS-DTL-23053/12A, PTFE 4:1
  Class 5 - 4:1 Heat Shrink, HS4TF
  Sizes 5/64" to 1-1/4"

AMS-DTL-23053/12A,ETFE 1.5/1
  Class 1 - 1.5/1 Heat Shrink, HS1.5
  Sizes 3/32" to 1-1/2"

 

 

 

AMS 3653 / AMS-T-81914 Convoluted Tubing

AMS 3653 / AMS-T-81914 Convoluted Tubing

Convoluted tubing adheres to stringent quality controls, delivering uniform convolutions that meet or exced the AMS-T-81914 specification. Tubing is also available in a static-dissipative tube or with wire reinforcement on the inside or outside to improve crush resistance.

> Learn more about AMS 3653 / AMS-T-81914 Convoluted Tubing

AMS-T-81914/1
  Convoluted, PTFE Standard Convolution, 81914/1
  Sizes 3/16" to 2"; Black

AMS-T-81914/2
  Convoluted, PTFE Close Convolution, 81914/2
  Sizes 3/16" to 2"; Black

AMS-T-81914/3
  Convoluted, FEP Standard Convolution, 81914/3
  Sizes 3/16" to 2"; Natural

AMS-T-81914/4
  Convoluted, FEP Close Convolution, 81914/4
  Sizes 3/16" to 2"; Natural
  Standard color is natural;
  Available in longer lengths than PTFE

AMS-T-81914/5
  Convoluted, ETFE Close Convolution, 81914/5
  Sizes 3/16" to 2"; Black

AMS-T-81914/6
  Convoluted, ETFE Standard Convolution, 81914/6
  Sizes 3/16" to 2"; Black
  Standard color is natural;
  Available in longer lengths than PTFE

 

 

 

AMS / MIL PTFE Tubing

AMS / MIL PTFE Tubing

Parflex PTFE tubing is used in all branches of Defense. We test and certify to some of the most rigourous specifications in the industry.

> Learn more about AMS / MIL PTFE Tubing

AMS 3655B
  PTFE Thin Wall Fractional & Spaghetti Tubing, TFT
  Sizes 1/8" to 3/4"; AWG 32 - AWG 0

AMS 3653E PTFE
  Standard Wall Tubing, TFS
  MIL-I-22129C Sizes 1/8" to 1"; AWG 30 - AWG 0
  Standard color is natural; Available

MIL-DTL-27267C
  PTFE Conductive Tubing
  Sizes 1/8" to 4"; AWG 32 - AWG 0

A-A-59602 PTFE Spiral Cut
  PTFE Spiral Cut Cable Wrap, TSWTF
  Sizes 1/8" to 1"

 

 

Parker Hannifin Corporation
Parflex Division
1300 N Freedom Street
Ravenna, OH 44266 USA
Ph: +1 (330) 296-2871
Fax: +1 (330) 296-8433
pfd_support@support.parker.com