Agriculture Hose Solutions

Parker’s full line of hydraulic hose and tubing solutions for the agriculture market offers unmatched weathering, ozone, and abrasion resistance, not to mention the industry’s tightest overall bend radius. Avoid downtime on your mobile agricultural equipment, combines, harvesters, attachments, and sprayers due to lose or failed hoses in need of maintenance and repair. Selling to Original Equipment Manufacturers (OEMs), Agricultural Products Dealers and Retail Farm Stores, Parker’s Hose Products Division is considered a leader in product quality and service. From low-pressure hydraulic hose to spiral wire high-pressure hydraulic hose assemblies, Hose Products Division is ready to service your company needs.

Constant Working Pressure hoses are designed to meet the most common working pressures within the agriculture industry. Choosing a constant working pressure hose simplifies the selection process no matter what hose diameter.

GlobalCore™ provides a simple solution of robust hydraulic hoses designed to endure tough conditions and to meet the most relied upon working pressures in industry. Designed, built, and tested to the ISO 18752 specification, hoses are available in Standard, ToughCover, and SuperTough cover options, and are ideal for petroleum-based hydraulic fluids and lubricating oils. Part numbers: 387: 3,000 psi/21 MPa 487: 4,000 psi/28 MPa 722: 4,000 psi/28 MPa 787: 5,000 psi/35 MPa 797: 6,000 psi/42 MPa

Hydraulic Industry Standard hoses are designed to handle extreme circumstances. Parker’s Hose Products Division has exactly what you need whether you need higher temperature hose assemblies, increased operating pressures, longer impulse life or maximum abrasion resistance, which is ideal for the agriculture industry.

Part numbers:

426 hose has a pressure range of 2,750 to 375 psi, which is designed for engine compartment applications. This hydraulic hose can handle high temperatures, up to 302° F and meets SAE 100R1 specifications. 436 hose is constructed with half the minimum bend radius and a smaller outside diameter (O.D.) to accommodate hydraulic applications with tighter routing requirements. It has a pressure range of 4,000 to 2,000 psi and can withstand up to 302° F. 722TC/ST hydraulic hose provides SAE 100R12 performance with half the bend radius, making it easy to install and reducing the amount of hose needed. A synthetic rubber inner tube gives 722 hose a wider range of fluid compatibility, and its four-spiral steel wire reinforcement prolongs its life in high-impulse, heavy-duty cycle applications.

Suction and Return Line hoses manufactured by Parker meet a wide range of suction and return applications requirements. Constructed with an oil- and weather-resistant synthetic rubber cover, these hoses are reinforced with multiple layers of fiber spiral and one helical wire.

Part numbers:

811: Up to 300 psi 811HT: Up to 300 psi 881: Up to 300 psi

Push-Lok^® Plus Multipurpose hose features the industry’s widest fluid compatibility, application range, and size range. It also incorporates the highest working pressure in all sizes, making it the most versatile general-purpose rubber hose available. Push-Lok assemblies can be made in seconds, saving valuable time and cost, which is vital for the agriculture industry.

Part numbers:

801: Multipurpose hose with a temperature range of up to 257° F 804: Dry air and hot water hose with a temperature range of up to 200° F 836: Multipurpose high temp hose with a temperature range of up to 302° F 821: Multipurpose high pressure hose with a temperature range of up to 212° F 821FR: Multipurpose fire resistant hose with a temperature range of up to 212° F

Hydraulic Low-temperature hoses are designed specifically to excel in brutal operating conditions of extreme cold. Parker’s low-temperature hoses are rated as low as -70° F, which are ideal for the agriculture industry. These No-Skive hoses use Parker’s standard 43, 71 or 79 Series steel and stainless steel fittings and easy-to-use Parkrimp style crimping system.


Part numbers:

472LT: Up to 5,800 psi 722LT: Up to 4,000 psi 792LT: Up to 6,000 psi

 
When it comes to farming, weather is in control. With Parker's complete line of industrial hose and tubing, we provide all your weather solutions for the agriculture market offering unmatched weathering, ozone, and abrasion resistance, not to mention the industry’s tightest overall bend radius. Parker's industrial hose provide improved amd smooth working conditions as well as precise control for optimum machinery performance.

Parker industrial hose help you control the smooth and efficient transfer for all your agiculturial demands. Parker industrial hose products are manufactured from a complete range of compounds and reinforcement methods. Whatever your agricultural needs, Parker provides superior performance of equipment, maintenance, repair and refurbishment.

Equipment/Engine Service hose provide maxium efficiency when considering coolant, fuel line, suction and return line hose. Part numbers:
Series 7395 E-Z Form™ Coolant Hose	Series 389 SAE Fuel Line Hose (CARB/SORE; EPA)	Series 7219 E-Z Form™ Multipurpose Return Line Hose
Fuel Service hose are designed for delivery, transfer and transport of oil and refined fuels. Part number:
Series 7216E Wildcatter® Petroleum Suction Hose
General/Multiple Purpose Service provide safe transfer of air, fertilizer/herbicide, and oil. Part numbers:
Series GST® II General Purpose Hose	Series 7212 Jiffy™ Push-On Hose	Series 7094 MPT® II Multipurpose Hose
Water Service hose are specifically designed for irrigation, layflat, pressure washer, and spray. Part number:
Series GST® II General Purpose Hose