Oil and Gas Hose Solutions

Parker provides the knowledge needed to produce hoses fit for severe conditions in today’s oil and gas industry. Parker's hoses are made for reliable, continuous use in offshore/onshore upstream applications, as well as midstream/transfer applications. Balancing the need to control costs while expanding exploration requires a supplier who can address these challenges and bring innovation and quality through products and services.

Parker hose meets the demands of the oil and gas industry by providing superior hands-on performance. The Wildcatter trade name indicates the hose is designed and manufactured for premium service in oilfield applications and is qualified with crimp couplings, providing industry-leading safe, durable and reliable industrial hose assemblies.

Constant Working Pressure hoses are designed to meet the most common working pressures within the oil and gas industry. Choosing a constant working pressure hose simplifies the selection process no matter what hose diameter.

GlobalCore™ provides a simple solution of robust hydraulic hoses designed to endure tough conditions and to meet the most relied upon working pressures in industry. Designed, built, and tested to the ISO 18752 specification, these high-performance hoses are available in Standard, ToughCover, and SuperTough cover options, and are ideal for for oil and gas exploration.

Part numbers:

187: 1,000 psi/7 MPa

487: 4,000 psi/28 MPa

787: 5,000 psi/35 MPa

797: 6,000 psi/42 MPa

Suction and Return Line hoses combine to meet a wide range of suction and return applications requirements. Constructed with an oil- and weather-resistant synthetic rubber cover, these hydraulic petroleum hoses are reinforced with multiple layers of fiber spiral and one helical wire.

Part numbers:

811: Up to 300 psi

811HT: Up to 300 psi

881: Up to 300 psi

Hydraulic Low-temperature hoses are designed specifically to excel in brutal operating conditions of extreme cold. Parker’s low-temperature hoses are rated as low as -70° F, which are ideal for the oil and gas industry. They are the ideal choice for artic oilfield applications. These No-Skive hoses use Parker’s standard 43, 71 and or 79 Series steel and stainless steel fittings and easy-to-use Parkrimp style crimping system.

Part numbers:

472LT: Up to 5,800 psi

722LT: Up to 4,000 psi

792LT: Up to 6,000 psi

Blowout Preventer hoses (BOP) are developed to meet the most rigorous demands of oilfield exploration and deep drilling. Our high-performance BOP drilling hoses are designed for hydraulic use and certified to withstand fire, high heat, and high pressures in safety-critical applications. All Fire Armor BOP hose assemblies are tested and approved by Lloyd’s Register, complying with American Petroleum Industry API 16D guidelines to meet and exceed OD/1000/499 flame testing at 1300° F for five minutes.

Part number:

FA21 or FA35: Up to 5,000 psi

P56 and P35 Cement Slurry hose can reduce well service set up times dramatically. What used to take hours to drag and connect multiple lengths of iron pipe into position can take minutes with Parker's P56 and P35 hydraulic hose assembly specifically designed for high-pressure cement-pumping applications. Parker's P56 and P35 Cement Slurry Hose work in conjunction with our innovative one-piece hammer union that incorporates a segmented design, allowing for easy removal of the wing nut from the hose assembly.

Part numbers:

	P3525: No-Skive, 5,000 psi hose with a SuperTough cover for long-lasting abrasion resistance
	P3575: 5,000 psi hose with an extremely thick SuperTough cover designed for ultra-abrasion resistance. Requires skiving
	P5625: No-Skive, 8,000 psi hose with a SuperTough cover for long-lasting abrasion resistance
	P5675: 8,000 psi hose with an extremely thick SuperTough cover designed for ultra-abrasion resistance. Requires skiving