Hose Products Division

Hose Products Division - Mining Hose Solutions
687583:MARKETS

Mining Hose Solutions

When wasted seconds mean wasted money, you need to power your mining operations with equipment you can count on. Parker’s complete line of industrial hose ensure your mine can keep up with demand. Parker’s hoses not only dramatically improve uptime, they also come backed by services designed to help you reduce inventory expenses, get replacement parts faster, and improve safety.

Parker's product line of industrial transfer hose provides solutions for use in surface and underground mine applications, such as dust suppression, pressure washer, and water suction and discharge. Many hoses incorporate MSHA flame resistant hose covers to minimize fire hazards. Parker's industrial hose offers abrasion resistant and provides longer life in this abrasive environment compared with the original high pressure hose.


Constant Working Pressure hoses are designed to meet the most common working pressures within the mining industry. Choosing a constant working pressure hose simplifies the selection process no matter what hose diameter.

GlobalCore provides a simple solution of robust hydraulic hoses designed to endure tough conditions and to meet the most relied upon working pressures in industry. Designed, built, and tested to the ISO 18752 specification, hoses are available in Standard, ToughCover, and SuperTough cover options, and are ideal for petroleum-based hydraulic fluids and lubricating oils.


Part numbers:

187 Series
187: 1,000 psi/7 MPa
387 Series
387: 3,000 psi/21 MPa
722 Series
722: 4,000 psi/28 MPa

787 Series
787: 5,000 psi/35 MPa
797 Series
797: 6,000 psi/42 MPa


Suction and Return Line
hoses combine to meet a wide range of suction and return applications requirements. Constructed with an oil- and weather-resistant synthetic rubber cover, these hydraulic hoses are reinforced with multiple layers of fiber spiral and one helical wire.


Part numbers:

811 Series

811: Up to 300 psi

811HT Series

811HT: Up to 300 psi

881 Seriesw

881: Up to 300 psi











Hydraulic Low-temperature
hoses are designed specifically to excel in brutal operating conditions of extreme cold, which are common within the mining industry. These No-Skive hoses are rated as low as -70° F and use Parker’s standard 43, 71 or 79 Series fittings.

Part numbers:

811: Up to 300 psi

811HT Series

811HT: Up to 300 psi

881 Series

881: Up to 300 psi


Coalmaster and Fire Suppression
hoses offer a complete, safe, high-quality, leak-free hydraulic solution for rock drilling, where high-impulse vibrations are commonplace. Parker’s abrasion-resistant hoses fit any mining or underground applications and offer a tighter bend radius to meet rock drilling’s specific routing requirements.

Part numbers:

CM (Coalmaster) hose

CM (Coalmaster) hose is a two-wire braid reinforced mining hose with 6,500 to 5,000 psi, which has been specially designed to meet the requirements of a hazardous and harsh environment. The CM hose, available in -4 to -8, has been thoroughly tested to meet internationally approved MSHA standards. Call 440-943-5700 for more information.

CM4H/CM4HP Series

CM4H/CM4HP (Coalmaster) hose is a heavy-duty, four-wire, spiral reinforced mining hose that has been specially designed to meet the requirements of a hazardous and harsh environment. The CM4H hose, available from -12 to -20, has been thoroughly tested to meet internationally approved MSHA, LOBA, and British Coal standards for up to 5,000 psi. Call 440-943-5700 for more information.

CM6H/CM6HP Series

CM6H/CM6HP (Coalmaster) hose is a heavy-duty, six-wire spiral reinforced mining hose that has been specially designed to meet the requirements of a hazardous and harsh environment. The CM6H hose, available from -24 to -32, has been thoroughly tested to meet internationally approved MSHA, LOBA, and British Coal standards for up to 5,000 psi. Call 440-943-5700 for more information.

421FS Series

421FS (Fire Suppression) hose is used on automatic fire suppression equipment requiring 2,750 to 1,250 psi. Most common use of this hose is on mining fire suppression equipment. 421FS is available from -4 to -12. Call 440-943-5700 for more information.

 

Equipment/Engine Service hose provide maxium efficiency when considering coolant, fuel line, suction and return line hose.

Part numbers:

Series 7395 E-Z Form™ Coolant Hose

Series 7395 E-Z Form™
Coolant Hose

Series 389 SAE Fuel Line Hose

Series 389 SAE Fuel Line Hose (CARB/SORE; EPA)

Series 7219 E-Z Form™ Multipurpose Return Line Hose

Series 7219 E-Z Form™ Multipurpose Return Line Hose

Dust Suppression uses high quality hose to control dust without the need for expensive extraction systems or chemical additives.

Part number:

Series 7268E Stinger™ II Wire Braid Water Hose

Series 7268E Stinger™ II Wire Braid Water Hose (MSHA)

General/Multiple Purpose Service provide safe transfer of air, fertilizer/herbicide, and oil.

Part numbers:

Series GST® II General Purpose Hose

Series GST® II
General Purpose Hose

Series 7107 Grizzly Multipurpose Hose

Series 7107 Grizzly Multipurpose Hose (MSHA, Non-conductive)

Series 7212 Jiffy™ Push-On Hose

Series 7212 Jiffy™
Push-On Hose

Series 7094 MPT® II Multipurpose Hose

Series 7094 MPT® II
Multipurpose Hose

Series 7095 MPT® II Multipurpose Hose

Series 7095 MPT® II
Multipurpose Hose

Water Service hose are specifically designed for irrigation, layflat, pressure washer, and spray.

Part number:

Series GST® II General Purpose Hose

Series GST® II General Purpose Hose

Welding

Part number:

Series 7126 Siameez® Twin Welding Hose

Series 7126 Siameez® Twin Welding Hose (ARPM/Grade R)

Hose Products Division
30240 Lakeland Blvd.
Wickliffe, OH 44092

phone: +1 (440) 943-5700
fax: +1 (440) 943-3129
www.parkerhose.com