Construction Hose Solutions

Most of our hydraulic hose offerings are used worldwide with heavy equipment and construction vehicles, including excavators, bulldozers, backhoes, and wheel loaders. Increased working pressures improve reliability and expanded applications compared to standard SAE 100R1. Manufactured to strict international specifications, our hoses offer customers consistent performance and improved availability anywhere in the world.

Constant Working Pressure hoses are designed to meet the most common working pressures within the construction industry. Choosing a constant working pressure hose simplifies the selection process no matter what hose diameter.

GlobalCore™ provides a simple solution of robust hydraulic hoses designed to endure tough conditions and to meet the most relied upon working pressures in industry. Designed, built, and tested to the ISO 18752 specification, hoses are available in Standard, ToughCover, and SuperTough cover options, and are ideal for petroleum-based hydraulic fluids and lubricating oils. Part numbers: 187: 1,000 psi/7 MPa 387: 3,000 psi/21 MPa 487: 4,000 psi/28 MPa 722: 4,000 psi/28 MPa 787: 5,000 psi/35 MPa 797: 6,000 psi/42 MPa Twin Tough hydraulic hoses reduce the labor and material costs required to manually bundle two separate hoses using tie straps or plastic sleeves, and are ideal for when abrasion-resistance and ease-of-use are required. With one-half the SAE 100R minimum bend radius, Twin Tough is flexible and easy to work with and install. It offers 3,000 psi/21MPa constant working pressure. Part numbers: 451TC Twin Tough

Hydraulic Industry Standard hoses are designed to handle extreme circumstances. Parker’s Hose Products Division has exactly what you need whether you need higher temperature hose assemblies, increased operating pressures, longer impulse life or maximum abrasion resistance, which is ideal for the construction market.

Part numbers:

JK – Jack Hose is designed for high performance while easily supporting the rigors of high-tonnage hydraulic jack applications. The engineered inner tube of this hydraulic hose provides exceptional compatibility and its No-Skive design eliminates the need to remove the hose cover before crimping. 426 hose has a pressure range of 2,750 to 375 psi, which is designed for engine compartment applications. This hydraulic hose can handle high temperatures, up to 302° F and meets SAE 100R1 specifications. 436 hose is constructed with half the minimum bend radius and a smaller outside diameter (O.D.) to accommodate hydraulic applications with tighter routing requirements. It has a pressure range of 4,000 to 2,000 psi and can withstand up to 302° F. 722TC/ST hydraulic hose provides SAE 100R12 performance with half the bend radius, making it easy to install and reducing the amount of hose needed. A synthetic rubber inner tube gives 722 hose a wider range of fluid compatibility, and its four-spiral steel wire reinforcement prolongs its life in high-impulse, heavy-duty cycle applications.

Suction and Return Line hoses manufactured by Parker meet a wide range of suction and return applications requirements. Constructed with an oil- and weather-resistant synthetic rubber cover, these hydraulic hoses are reinforced with multiple layers of fiber spiral and one helical wire.

Part numbers:

811: Up to 300 psi 811HT: Up to 300 psi 881: Up to 300 psi

Push-Lok^® Plus Multipurpose hose features the industry’s widest fluid compatibility, application range, and size range. Parker's Push-Lok hydraulic hose also incorporates the highest working pressure in all sizes, making it the most versatile general-purpose rubber hose available. Push-Lok assemblies can be made in seconds, saving valuable time and cost, which is vital for the construction industry.

Part numbers:

801: Multipurpose hose with a temperature range of up to 257° F 804: Dry air and hot water hose with a temperature range of up to 200° F 836: Multipurpose high temp hose with a temperature range of up to 302° F 821: Multipurpose high pressure hose with a temperature range of up to 212° F 821FR: Multipurpose fire resistant hose with a temperature range of up to 212° F

Hydraulic Low-temperature hoses are designed specifically to excel in brutal operating conditions of extreme cold. Parker’s low-temperature hoses are rated as low as -70° F, which are ideal for the construction market. These No-Skive hoses use Parker’s standard 43, 71 or 79 Series steel and stainless steel fittings and easy-to-use Parkrimp style crimping system.


Part numbers:

472LT: Up to 5,800 psi 722LT: Up to 4,000 psi 792LT: Up to 6,000 psi

 
Manufactured to strict international specifications, Parker hose offer customers consistent performance and improved availability anywhere in the world. After increasing working pressures to improve reliability and expand applications, Parkers specialty construction hoses can handle anything put through them.

No matter where you are in the life cycle of your construction projects, highly engineered Parker industrial hose supplies optimal performance and maximum service life. From clearing, building and landscaping to curbing, paving and striping, Parker's industrial hose are specifically engineered for extreme working conditions.

Equipment/Engine Service hose provide maxium efficiency when considering coolant, fuel line, suction and return line hose. Part numbers:
Series 7395 E-Z Form™ Coolant Hose	Series 389 SAE Fuel Line Hose (CARB/SORE; EPA)	Series 395 SAE Fuel Line Hose
Series 7219 E-Z Form™ Multipurpose Return Line Hose
General/Multiple Purpose Service provide safe, productive transfer of air, water, mild chemicals, fuel, and oil. Part numbers:
Series GST® II General Purpose Hose	Series 7212 Jiffy™ Push-On Hose	Series 7084 Twinhammer™ Jackhammer Hose
Series 7094 MPT® II Multipurpose Hose
Water Service hose supply custom made hose that are fit for irrigation, layflat, pressure washer, and spray. Part number:
Series GST® II General Purpose Hose