Snap-Trap Tube Clamp Systems


Choosing the best possible components for a given application or environment can greatly control corrosion, not to mention the hazards and costs associated with it. Parker’s Snap-Trap® is an innovative clamp designed to help customers defend against corrosion while radically simplifying the installation and maintenance of instrumentation tubing. Minimal contact points make Snap-Trap clamps a much better solution for avoiding crevice corrosion between the tubing and support system. When paired with Parker 6Mo Tubing and Fittings (both very resilient to uniform and pitting corrosion), you’ll realize far greater confidence in your long-term corrosion control efforts. Snap-Trap’s unique one-piece design allows quick and easy fitting to cable trays, brackets, and angle iron alike. The clamp will fit slotted cable trays with various dimensions and can be mounted to any other design of trays with the aid of brackets.


• Salt spray tested with Parker 6Mo Tubing per ASTM B-117/ISO 9227
• Erected without using traditional tools – no slippage of spanners on nut or bolt hexagons
• Available in 5 sizes covering both imperial and metric tubing
• Significant reduction in installation time (less than two minutes)
• No bolts to be fastened to the ladder, tray, etc.; no additional spare parts to be ordered
• Designed by an offshore contractor, with over one million installed worldwide
• Complies fully to NORSOK standard Z-CR-010
• Brackets, cable trays, keys, and accessories available

> Learn more about Parker Snap-Trap® Tube Clamp Systems

Additional Flow Control Products:

Hand Valves

All Parker Hand Valves are ANSI / ASME B31.1 & B31.3 COMPLIANT
• FB Series – Bellows Valves (6,000 psi) – ANSI / ASME B31.1 & B31.3 COMPLIANT
• GV/HGV Series – Multi-Port Gauge Valves
• MPN – Medium Pressure Needle Valves – ANSI / ASME B31.1 & B31.3 COMPLIANT
• PV/HRPV Series – Rising Stem Plug Valves – ANSI / ASME B31.1 & B31.3 COMPLIANT
• SN6 Series – Integral Bonnet Valves (6,000 psi) – ANSI / ASME B31.1 & B31.3 COMPLIANT
• VG/HVG Series – Single Port Gauge Valves (with vent) – ANSI / ASME B31.1 & B31.3 COMPLIANT
• YV Series – Outside Screw & Yoke Globe Pattern Needle Valves – ANSI / ASME B31.1 & B31.3 COMPLIANT

Purge Valves
• BV Series – Bleed/Purge Valves
• PG Series – Bleed, Purge or Drain Valves

Relief Valves
• HRPV Series – PED-Approved Relief Valves
• LPRA Series – Medium Pressure Relief Valves
• MPR Series – Relief Valves
• RH4 Series – High Pressure Relief Valves
• RL4 Series – Relief Valves

Tubing (Fractional/Metric)
• 316/316L Stainless Steel Instrumentation Tubing

Instrumentation Filters
• F Series – Inline Type Filters
• FT Series – Tee Type Filters
• MPF Series – Sintered Stainless Steel Filters


• Water treatment systems
• Gauge clusters
• Hydrogen cooling (generators)
• Instrument air lines and panels

Parker Hannifin Corporation
6035 Parkland Blvd.
Cleveland, OH 44124
Tel: +1 216 896 3000