Parker - ICOUNT PD




Please wait. Catalogs are being retrieved...

ICOUNT PD

ICOUNT PD

icountPD

Parker Hannifin’s icountPD represents the most up-to-date technology in solid particle contamination analysis. The icountPD is a compact, permanently-mounted laser-based particle detector module that provides a cost-effective solution to fluid management and contamination control.

The icountPD measures particle contamination continuously and updates the display, output options and limit relay every second.

Unlike the Parker CM20, LCM20 or MCM20, the unit does not perform a ‘one-off’ test. This means that even if the Measurement Period is set to 60 seconds, the display, output and limit relay all report the presence of dirt in the oil in just a few seconds – it does not wait until the end of the Measurement Period before reporting the result.

The icountPD has just one setting to control the accuracy, stability and sensitivity of the measurements and that is the ‘Measurement Period’. This can be set from 5 seconds to 180 seconds.  The user can select how sensitive the icountPD is to spikes of contaminant, and how quickly it responds to contamination levels above the set point (‘limits’).

 Benefits

  1. ·         Calibration by recognised online principles confirmed by relevant International Organization for Standardization (ISO) procedures
  2. ·         Early warning LED or digital display indicators for Low, Medium and High contamination levels
  3. ·         A low cost solution to prolonging fluid life and reducing machine downtime
  4. ·         Visual indicators with power and alarm output warnings
  5. ·         Self-diagnostic software
  6. ·         Mineral and phosphate ester fluid compatible
  7. ·         Fully PC/PLC integration technology such as: RS232, 0–5V, 4–20mA and CAN-bus (SAE J1939)
  8. ·         Percentage saturation reporting through an integrated moisture sensor – see the ‘Product Configurator’, page 45, for moisture sensor options.

 

IcountPDR             

Parker Hannifin’s icountPDR is an on-line laser particle detector. This mineral based hydraulic fluid contamination detector is designed for use in robust areas and is housed in a stainless steel IP69K approved enclosure.

The unit has two size 06L EO 24° cone-end hydraulic connections that allow the fluid to be transferred through the unit for analysis. The electrical supply and communication is made via an M12 Ultra Lock IP69K approved connector.

Parker Hannifin’s icountPDR represents the most up-to-date technology in solid particle contamination analysis. The icountPDR is a compact, permanently-mounted laser-based particle detector module that provides a cost-effective solution to fluid management and contamination control.

Principles of operation

The icountPDR measures particle contamination continuously and updates the output options and limit relay every second.

The icountPDR has just one setting to control the accuracy, stability and sensitivity of the measurements and that is the ‘Measurement Period’. This can be set from 5 seconds to 180 seconds. The user can select how sensitive the icountPDR is to spikes of contaminant, and how quickly it responds to contamination levels above the set point (‘limits’)

Benefits

  • Independent monitoring of system contamination trends
  • Calibration by recognised online principles confirmed by relevant International Organization for Standardization (ISO) procedures
  • Indicators for Low, Medium and High contamination levels
  • A low cost solution to prolonging fluid life and reducing machine downtime
  • Self-diagnostic software
  • Mineral fluid-compatible construction
  • Fully PC/PLC integration technology such as: RS232, 0–3V/0–5V, 4–20mA and CAN-bus (SAE J1939)
  • Percentage saturation reporting through an integrated moisture sensor

 

icountPDZ

Parker Hannifin’s IPD Z2 is an on-line laser particle detector. This mineral based hydraulic fluid contamination detector is designed for use in ATEX category 3 areas and is housed in a stainless steel IP69K approved enclosure.

The unit has two size 06L EO 24° cone-end hydraulic connections that allow the fluid to be transferred through the unit for analysis. The electrical supply and communication is made via two M12 Ultra Lock IP69K approved connectors.

Parker Hannifin’s icountPDZ2 represents the most up-to-date technology in solid particle contamination analysis. The icountPDZ2 is a compact, permanently-mounted laser-based particle detector module that provides a cost-effective solution to fluid management and contamination control.

Principles of operation

The icountPDZ2 measures particle contamination continuously and updates the output options and limit relay every second.

The icountPDZ2 has just one setting to control the accuracy, stability and sensitivity of the measurements and that is the ‘Measurement Period’. The user can select how sensitive the icountPDZ2 is to spikes of contaminant, and how quickly it responds to contamination levels above the set point (‘limits’).

.Benefits

  • Independent monitoring of system contamination trends
  • Calibration by recognised online principles confirmed by relevant International Organization for Standardization (ISO) procedures
  • Indicators for Low, Medium and High contamination levels
  • A low cost solution to prolonging fluid life and reducing machine downtime
  • Self-diagnostic software
  • Mineral fluid-compatible construction
  • Fully PC/PLC integration technology such as: RS232, 0–3V/0–5V, 4–20mA and CAN-bus (SAE J1939) Percentage saturation reporting through an integrated moisture sensor

 

View Parts

  • HYDRAULIC FILTER

    DescriptionValue
    PRODUCT TYPEValve Ball
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12112140

    DescriptionValue
    PRODUCT TYPECondition Monitor Particle Counters/detectors
    DESCRIPTIONicount PDR
    FLUID MEDIUMHYDRAULIC
    FLOW RANGE40-140 ml/min
    CALIBRATIONannual
    PRESSURE RATING2-420 bar (30-6000 PSI)
    PORT/CONNECTION SIZE06L EO 24 cone end
    ADDITIONAL DETAILIP69K rating
    TRADE/BRAND NAMEPARKER HANNIFIN
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12112240

    DescriptionValue
    PRODUCT TYPECondition Monitor Particle Counters/detectors
    DESCRIPTIONicount PDR
    FLUID MEDIUMHYDRAULIC
    FLOW RANGE40-140 ml/min
    CALIBRATIONannual
    PRESSURE RATING2-420 bar (30-6000 PSI )
    PORT/CONNECTION SIZE06L EO 24 cone end
    ADDITIONAL DETAILIP69K rating
    TRADE/BRAND NAMEPARKER HANNIFIN
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12113110

    DescriptionValue
    PRODUCT TYPEFilter Hydraulic/lube Oil
    DESCRIPTIONiCOUNT PARTICLE DETECOR
    MAXIMUM FLOW RATE40ml - 140ml nominal 60ml/min
    FILTER RATINGN/A
    PORT/CONNECTION SIZEA 06L EO 24deg cone
    PRESSURE RATING2 to 420 Bar
    SEALSN/A
    INDICATORN/A
    ADDITIONAL DETAILN/A
    TRADE/BRAND NAMEPARKER HANNIFIN
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12113140

    DescriptionValue
    PRODUCT TYPECondition Monitor Particle Counters/detectors
    DESCRIPTIONicount PDR
    FLUID MEDIUMHYDRAULIC
    FLOW RANGE40-140 ml/min
    CALIBRATIONannual
    PRESSURE RATING2-420 bar (30-6000 PSI)
    PORT/CONNECTION SIZE06L EO 24 cone end
    ADDITIONAL DETAILIP69K rating
    TRADE/BRAND NAMEPARKER HANNIFIN
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12113240

    DescriptionValue
    PRODUCT TYPECondition Monitor Particle Counters/detectors
    DESCRIPTIONicount PDR
    FLUID MEDIUMHYDRAULIC
    FLOW RANGE40-140 ml/min
    CALIBRATIONannual
    PRESSURE RATING2-420 bar (30-6000 PSI)
    PORT/CONNECTION SIZE06L EO 24 cone end
    ADDITIONAL DETAILIP69K rating
    TRADE/BRAND NAMEPARKER HANNIFIN
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12115210

    DescriptionValue
    PRODUCT TYPEFilter Hydraulic/lube Oil
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12115210ZL

    DescriptionValue
    PRODUCT TYPECondition Monitor Particle Counters/detectors
    DESCRIPTIONIPDR ZOOMLION
    FLUID MEDIUMOIL
    FLOW RANGE60 ML/MIN
    CALIBRATIONANNUAL
    PRESSURE RATING2 - 420 BAR
    PORT/CONNECTION SIZEA 06L EO 24 DEG
    ADDITIONAL DETAILSPECIAL SOFTWARE
    TRADE/BRAND NAMEPARKER HANNIFIN
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR12115240

    DescriptionValue
    PRODUCT TYPECondition Monitor Particle Counters/detectors
    DESCRIPTIONicountPDR
    FLUID MEDIUMMineral
    FLOW RANGE40 - 140 ml/min
    CALIBRATIONannual
    PRESSURE RATING2 - 420 bar
    PORT/CONNECTION SIZEA 06L E0 24deg
    ADDITIONAL DETAILRS232/CAN-bus
    TRADE/BRAND NAMEParker Hannifin
    ConfiguratorNO
    CAD Drawing AvailableNO
  • IPDR32112140

    DescriptionValue
    PRODUCT TYPECondition Monitor Particle Counters/detectors
    DESCRIPTIONParticle detector IPDR32112140
    FLUID MEDIUMfuel
    FLOW RANGE40 -140 ml/min
    CALIBRATIONannual
    PRESSURE RATINGmax 420 Bar
    PORT/CONNECTION SIZEn/a
    ADDITIONAL DETAILn/a
    TRADE/BRAND NAMEParker Hannifin
    ConfiguratorNO
    CAD Drawing AvailableNO