Parker - 518C SERIES - NON CONDUCTIVE, 1000-3000 PSI




Please wait. Catalogs are being retrieved...

518C SERIES - NON CONDUCTIVE HOSE

518C SERIES - NON CONDUCTIVE HOSE
  Product Literature
  Terms and Conditions - Parker as Seller (1)

Features
Twin or multi-line constructions available
High density braid for maximum impulse life without loss of flexibility


Certifications
Meets SAE J517 for less than 50 micro-amps leakage under 75,000 volts per ft.
Meets or exceeds SAE 100R7 specifications and Electrical Standards except 518C-2 with respect to Maximum working pressure ANSI A92.2


Applications
Medium pressure hydraulic service where both field attachable and permanent hydraulic circuit exposure and contact with high voltage may be encountered


Construction
Tube: Copolyester
Reinforcement: Fiber
Cover: Proprietary Blend (PFX)


Operating Parameters
Temperature Range:
 -40°F to +212°F (-40°C to +100°C)
 (Limited to +135°F (+57°C) for synthetic hydraulic fluids and water-based fluids)
Change in working length @ Rated WPSI: ±2% 
Min. Burst Pressure:
 4:1 Design Factor is required if hose failure will result in movement of aerial device
 3:1 Design Factor is acceptable if hose failure will not result in movement of aerial device SAE requires 4:1 Design Factor

Colors
 Orange


Fittings
51 Series     55 Series
57 Series     58 Series
Crimp information can be found online, for most Parker products, at www.parker.com/crimpsource


Notes
-Non-perforated cover
-Lay lines on this hose will have both ANSI and SAE maximum working pressure listed. ANSI A92.2-1990 “Vehicle Mounted Elevating and Rotating Aerial Devices”
-3/16” and 1/4” working pressure reduced to 3,000 and 2,750 PSI respectively when using field attachable couplings
-51 Series field attachable couplings are not intended for use on hose that has previously been in service

View Parts

  • 518C-10

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.625"
    MAXIMUM OUTSIDE DIAMETER0.970"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS4"
    MAX ALLOWABLE WORKING PRESSURE 4:12000wpsi ANSI A92.2 or 1500wpsi SAE 100R7
    FITTING STYLE58 Series
    ADDITIONAL DETAILNon conductive hose - Standard color is orange, twin-line and multi-line constructions available.
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-12

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.750"
    MAXIMUM OUTSIDE DIAMETER1.090"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS5"
    MAX ALLOWABLE WORKING PRESSURE 4:11660wpsi ANSI A92.2 or 1250wpsi SAE 100R7
    FITTING STYLE55 or 51 Series
    ADDITIONAL DETAILNon conductive hose - Standard color is orange, twin-line and multi-line constructions available.
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-16

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER1.000"
    MAXIMUM OUTSIDE DIAMETER1.320"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS8"
    MAX ALLOWABLE WORKING PRESSURE 4:11330wpsi ANSI A92.2 or 1000wpsi SAE 100R7
    FITTING STYLE55 or 51 Series
    ADDITIONAL DETAILNon conductive hose - Standard color is orange, twin-line and multi-line constructions available.
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-2

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.125"
    MAXIMUM OUTSIDE DIAMETER0.340"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS1/2"
    MAX ALLOWABLE WORKING PRESSURE 4:13150wpsi ANSI A92.2 or 2500wpsi SAE 100R7
    FITTING STYLE57 Series
    ADDITIONAL DETAILNon conductive hose - Standard color is orange, twin-line and multi-line constructions available.
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-3

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.188"
    MAXIMUM OUTSIDE DIAMETER0.430"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS3/4"
    MAX ALLOWABLE WORKING PRESSURE 4:13250wpsi ANSI A92.2 or 2500wpsi SAE 100R7
    FITTING STYLE55 or 51 Series
    ADDITIONAL DETAILWorking pressure reduced to 3,000 when using FA fittings
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-4

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.250"
    MAXIMUM OUTSIDE DIAMETER0.470"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS1-1/2"
    MAX ALLOWABLE WORKING PRESSURE 4:13150wpsi ANSI A92.2 or 3000wpsi SAE 100R7
    FITTING STYLE55 or 51 Series
    ADDITIONAL DETAILWorking pressure reduced to 2,750 when using FA fittings
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-5

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.313"
    MAXIMUM OUTSIDE DIAMETER0.570"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS1-3/4"
    MAX ALLOWABLE WORKING PRESSURE 4:13150wpsi ANSI A92.2 or 2500wpsi SAE 100R7
    FITTING STYLE55 or 51 Series
    ADDITIONAL DETAILNon conductive hose - Standard color is orange, twin-line and multi-line constructions available.
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-6

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.375"
    MAXIMUM OUTSIDE DIAMETER0.640"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS2"
    MAX ALLOWABLE WORKING PRESSURE 4:13000wpsi ANSI A92.2 or 2250wpsi SAE 100R7
    FITTING STYLE55 or 51 Series
    ADDITIONAL DETAILNon conductive hose - Standard color is orange, twin-line and multi-line constructions available.
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO

  • 518C-8

    Click to View Part

    DescriptionValue
    PRODUCT TYPEThermoplastic Hose Low/medium Pressure
    PART NUMBER518C
    JACKET MATERIALPFX Proprietary Blend
    MINIMUM INSIDE DIAMETER0.500"
    MAXIMUM OUTSIDE DIAMETER0.810"
    MINIMUM BURST PRESSURE4x Max. Working Pressure at 73°F (23°C)
    MINIMUM BEND RADIUS3"
    MAX ALLOWABLE WORKING PRESSURE 4:13000wpsi ANSI A92.2 or 2250wpsi SAE 100R7
    FITTING STYLE55 or 51 Series
    ADDITIONAL DETAILNon conductive hose - Standard color is orange, twin-line and multi-line constructions available.
    TRADE/BRAND NAMEParflex
    SYNONYMSAE J517 ANSI A92.2 hose
    ConfiguratorNO
    CAD Drawing AvailableNO