The entire line of Logic Elements is new to the Parker Catalog. Parker Logic Valves are offered in two basic categories: Poppet and Spool.
Parker’s logic valves offer system designers a versatile range of screw-in elements that, when used in the proper combinations, can provide flexible design solutions for many common cartridge valve applications. They offer system designers the advantage of applying cartridge valve technology in applications where the flow and pressure conditions may exceed the limits of typical cartridge valves. Logic valves are essentially high flow poppet or spool elements that are controlled by small pilot devices. They can be used to control flow, pressure, or direction, and when applied in the proper arrangements, can perform multi-task control functions. Parker’s logic valves offer system designers alternative products that can help reduce the size, cost, and complexity of integrated manifold systems.
Features:
Parker PAGE International offers extra protection for most harsh environments. Hose assemblies are available with custom options such as Silicone Fire Sleeve, Fluoropolymer Heat Shrink, Polyolefin Shrinkable Chafe Sleeve, External Spring Guard or Stainless Steel Interlocking Casings (Armor Guard). These protective coverings not only extend hose life, but also provide an extra measure of safety to personnel working with them.
Contact Customer Service for more information at 817-624-1329 / 800-847-7280 or email page@parker.com
BG Series Blow Guns are light weight with variable flow control. Bodies are made of impact resistant plastic. Nozzle configurations are available in short and extended versions.
Note: All BG Series Blow Guns do NOT meet OSHA requirements.
BG442-SBL and BG444-SBL meet the requirements of OSHA directive #100-1.
PARKER/PAGE International designs and manufactures high quality seamless convoluted hoses that are open pitched and self draining. Standard seamless PTFE braided hoses are extremely lightweight, flexible and kink resistant. PARKER/PAGE Convoluted Fluoropolymer PTFE hoses are less subsceptible to cracking from stress or flexing than metal hoses or other Fluoroplastic hoses when used within designated operating parameters.
PARKER/PAGE offers two types of PTFE inncercore, natural and conductive (static-dissipative). External hose reinforcements consist of stainless steel, polypropylene and many other metallic and non-metallic braid options including fire sleeve, wire guard and polyolefin heat shrinkable tubing.
• PTFE is Extremely Chemical Resistant - (Non- Corrosive) • Environmentally Safe - (Low Effusion) • Non-Adhesive • Easy Cleaning • Long Life Expectancy • Maximum Durability
For more information, please contact Customer Service at 817-625-0076 * 800-847-7280 or email page@parker.com
PARKER/PAGE International Smoothbore PTFE Hose is specified in many of the most challenging industrial applications. The extruded PTFE tube has excellent flex life, high temperature tolerance and superior chemical resistance. PTFE is steam compatible and non-adhesive, making it an excellent choice for applications requiring steam cleaning of an assembly or transfer of highly viscous media such as adhesives and paints.
PARKER/PAGE PTFE hose products are FDA compliant and an ideal choice for food and beverage applications. High temperature hydraulic and pneumatic systems, such as those found in steel mills, foundries, transit buses and air compressors are examples of industrial applications that showcase PARKER/PAGE hose as a problem solver.
For more information, please contact Customer Service at 817-625-0076 or 800-847-7280 or email page@parker.com
The forged body ball valve provides extended service life and resists failure caused by severe temperature applications. Optimum flow design assures maximum system efficiency. Highly inert PTFE seats and seals provide resistance to chemical corrosion. Parker also provides a blow-out proof stem, chrome plated brass ball and a specially designed handle enabling increased turning leverage for ease of opening and closing. Parker’s ball valve can be readily identified assuring high quality engineering and reliability.
Applications The industrial ball valve product line is intended for general purpose use. Please be aware that ball valves are intended for use in the fully open or closed positions. Depending on application conditions, throttling of the valve may result in premature seal failure and/or inability to turn the valve handle.
For use as fuel line shutoffs for gasoline and diesel powered over the highway, off highway, and construction equipment vehicles. Water and air service lines on capital equipment and plant design plumbing that require total shutoff capability.
Sizes 1/4" - 2" Working Pressure 29in. Hg Vacuum to 600 PSI (Vented, 250 PSI) 150 PSI saturated steam Temperature Range 0º to +250ºF
Advantages All pipe fitting threads are made to Dryseal standards.* Connectors, unions, nuts and extruded elbows and tees are machined from CA 360 and CA 345 brass; forged elbows and tees are machined from CA 377 brass.
Specifications Meets functional requirements of the SAE J530, SAE J531 and ASA.
Applications Use with brass, copper or iron pipe. Manufactured for low and medium pressure line connection work.
Working Pressure and Temperature Ranges From -65° to +250°F. at 1000 psi.
Vibration Fair resistance to vibration and pipe movement depending upon conditions
The carbon steel ball valves have a hex shaped body for easy installation. Highly inert PTFE seats and seals combined with an external phosphate coating provide superior corrosion resistance. Parker also provides a blow-out proof stem and a specially designed handle enabling increased turning leverage for ease of opening and closing. Parker’s ball valve can be readily identified assuring high quality engineering and reliability. This economical ball valve is available in female pipe sizes.
For use as fuel line shutoffs for gasoline and diesel powered over the highway, off highway, and construction equipment vehicles. High quality carbon steel valves with corrosion-resistant coating for reliable, economical shutoff on general industrial and hydraulic lines.
Sizes 1/4" & 3/8" (full port) 1/2" - 2" (standard port) Working Pressure to 2000 PSI (1/4" - 1") to 1500 PSI (1-1/4" - 2") to 150 PSI saturated steam Temperature Range -50º to +450ºF
Check valves are poppet style elements that allow free flow in one direction while preventing flow in the reverse direction. They can be used to isolate portions of a hydraulic circuit or to provide a free flow path around a restrictive valve.
Types:
Parker designs its Compact Hydraulic Cylinder with a corrosion resistant aluminum alloy body, low profile switches, a bi-directional piston seal, optional ports, and a chrome-plated piston rod and four rod end styles. Primary and secondary seals ensure the cylinder can withstand pressure variations and conform to any mechanical deflection that may occur.
No flaring, soldering or other preparation of tubing is necessary. Preassembled fitting, with captive sleeve. Sleeve is always oriented for correct installation, visible for inspection before and after installation. Heavy-duty fitting aligns to seal even out-of-round tubing. More quickly assembled than either flare or standard tapered sleeve compression fittings. Compress-Align bodies are interchangeable with standard compression fitting bodies. This economical fitting is available in straights, tees and elbows 1/8 in. O.D. through 1 in. O.D. tube size. Manufactured from CA 360, CA 345 or CA 377 brass.
Specifications Listed with Underwriter’s Laboratories for flammable liquids. Consult list of UL listed fittings on page 6 for specific configurations.
Applications Use with copper, brass, aluminum and thermoplastic tubing. Manufactured for low and medium pressure tubing connections.
Temperature Ranges From -65° to +250°F.
Vibration Fair resistance to minimal vibration or tube movement.
Assembly Instructions With nut finger tight on fitting body, insert tubing until it bottoms in the fitting. Complete the seal with one wrench turn on all sizes.
No flaring, soldering or other preparation of tubing necessary to assemble. This economical fitting is readily available in a broad selection of styles. Manufactured from CA 360, CA 345 or CA 377 brass.
Specifications Listed with Underwriter’s Laboratories for flammable liquid. Compression fittings meet functional requirements of SAE J-512. Refer to list of UL listed fittings on page 6 for specific configurations.
Applications Use with copper, aluminum, and Parflex thermoplastic tubing.Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Not recommended for application using gaseous media.
Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73°F. For thermoplastic tubing, see manufacturers recommendation for pressure range.
Temperature Ranges From -65° to +250°F with soft metal tubing. For thermoplastic tubing, see manufacturers recommendation for tubing temperature range.
Vibration Fair resistance to vibration or tube movement, depending on applications involved. Use long nut for additional resistance to vi
Convoluted tubing is available in PTFE, FEP and PFA and also in sizes made to M81914/1 - M81914/6. For a complete selection of products, please contact Parker TexLoc Customer Service at 800-423-6551 or email texloc@parker.com.
For convoluted tubing with fittings or flanges, please contact Parker PAGE Customer Service at 800-847-7280 or email page@parker.com
"Tex-Flex" FEP corrugated tubing is capable of turning sharp corners with very small bend diameters without reducing the inside diameter of the tube. These tubes also have a low refractive index allowing operators to watch and monitor any material passing through the tube and the non-stick surface allows for easy cleaning.
"Tex-Flex" FEP corrugated tubes operate in applications where high temperatures are needed and other materials are not suitable. The maximum continuous operating temperature is up to 200°F/93°C @ 0 pressure. Tubes can also be stainless steel braided for higher pressures or can be special ordered in TEXfluor® PFA corrugation for a maximum continuous operating temperature up to 300°F/148°C @ 0 pressure.
"Tex-Flex" FEP corrugated is an excellent electrical insulator and resists most strong corrosive liquids like hot acids. It is often used as an electrical or fluid conduit with robots that have flexible arms to deliver electrical wiring, air, or corrosive liquids".
Materials available: FEP, PFA and High Purity PFA. Maximum length: 12 feet
*This product is normally supplied in shorter lengths with cuffs on each end. Pricing is based on quantity. A typical request would look like 5 pc&
Custom Cylinders are purpose-built cylinders with unique features and do not follow a common standard or size. Parker manufactures and supports Custom Cylinders worldwide.
Parker's CV Series Check Valves are a rugged built and versatile product designed to protect hydraulic systems from fluid back pressure. The two piece body design offers more end configurations than a one piece body. The larger body also results in less pressure drop and increased proformance. The CV Series are in-line unidirectional valves, available in sizes 1/4" to 1", with a pressure rating up to 3000 PSI, flow capacities to 100 GPM, and a variety of port options. Standard spring crack pressures are 5 and 65 PSI. Other crack pressures available upon request.
DIN slip-in cartridge valves are used in high-demand, high-pressure systems. These applications include die-cast and plastic machines, hydroelectric equipment, as well as powdered-metal and other large presses. Parker's modular design allows a variety of valve configurations from simple check to high-response throttle valves. Engineers can set on/off or proportional pressure, flow, and directional control. DIN slip-in cartridge valves handle pressure to 5,000 PSI and flows up to 3,000 GPM.
Parker offers a variety of Directional Control Valves including:
Parker's DM Series offers double shut-off valving and push-to-connect operation in a small envelope size. They are constructed of nickel plated brass and are available in 1/8" body size only. Standard seals are fluorocarbon. Available in female pipe thread (NPTF) and male pipe thread (NPTF) end configurations.
Drain Cock Advantages Both external-seat and internal-seat drain cocks are manufactured to the highest quality standards. Hand-tightening provides a metal-tometal seal.
Ground Plug Shutoff Advantages These economical valves are available in several styles. Brass castings or forged bodies for extra strength.
Applications Manufactured for use with low pressure air, water, gas and certain other fluids. (Note: lubricant may not be compatible with some fluids, contact factory for special fluid requirements.)
Temperature and Working Pressure Ranges System temperature and the type of tubing used should be considered. Ground plug shutoffs are designed to withstand 30 PSI working pressure. Drain cocks are designed to withstand 150 PSI working pressure, except where noted. See specific part number for temperature range.
DT Series Check Valves are designed to protect hydraulic systems from fluid back pressure. DT series features a compact one-piece body design. Sizes are available in 1/4" to 1-1/4" with six different fitting styles. DT Series check valves have a maximum operating pressure of 5000 PSI. Standard crack pressures include 1, 5, and 65 PSI. Other crack pressures up to 200 PSI in 5 PSI increments are available upon request.
Parker's E-z-mate exhaust coupler is designed to connect and disconnect at zero pressure by incorporating a secondary valve sleeve. The valve sleeve allows trapped internal pressure to be exhausted prior to disconnect thereby eliminating hose whip. Coupler material is steel with nitrile seals.
Available in body sizes 1/4" through 3/4" with female pipe thread (NPTF), male pipe thread (NPTF), standard and Push-Lok hose barb end configurations.
Couplers meet ISO 4414 specification to allow trapped pressure to be vented prior to disconnection.
E-z-mate couplers connect with Industrial Interchange nipples.
Engineered for feedback, control, and heavy duty applications, Parker Electrohydraulic Cylinders offer high performance to meet a range of application needs.
Parker's Electrohydraulic solutions offer precision and control over hydraulic and pnuematic systems. Products include stand alone digital motion controllers with user-friendly interfaces, electronic drivers to control pressure valves, and servo valves that help maintain position, velocity and force in motion control applications.
Parker digital products can be configured using our software ProPxD
Parker EMA3 test port couplings provide a metering point for quick, and simple measurement in high and low pressure fluid systems.
Parker's FC Series Nipples provide connect-under-pressure capability with up to 3000 PSI of trapped pressure in the nipple. FC Series nipples connect with Parker's FF series couplers and are ideal for applications where residual pressure makes reconnection difficult. The flush face design eliminates hydraulic spillage and air inclusion when connecting and disconnecting. Anti-blowout seal in the nipple prevents damage and premature failure. Nipple bodies are steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in body sizes 3/8" through 3/4" with female pipe thread (NPSF), and female straight thread (ORB) as standard end configurations.
Parker's FEC Series Nipples provide connect-under-pressure capability with up to 3000 PSI of trapped pressure in the nipple. FEC Series nipples connect with Parker's FEM series couplers (ISO 16028 interface) and are ideal for applications where residual pressure makes reconnection difficult. The flush face design eliminates hydraulic spillage and air inclusion when connecting and disconnecting. Anti-blowout seal in the nipple prevents damage and premature failure. Nipple bodies are steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in body sizes 1/2" and 3/4" with female pipe thread (NPSF), and female straight thread (ORB) as standard end configurations.
FEM Series Couplings are non-spill, push-to-connect quick disconnects designed for use in the construction, utility, and agricultural equipment markets where global interchangeability with other manufacturers is important. The push-to-connect sleeve allows one handed operation. The flush face design eliminates hydraulic spillage and air inclusion when connecting and disconnecting. Anti-blowout seal on the male half prevents damage and premature failure with residual system pressure. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in body size
The basic bite type fitting was first developed in Europe in the early 1930s.
The Ferulok fitting was later developed by Parker-Hannifin and introduced to the U.S. market in the mid-1940s. The Ferulok fitting design utilizes a combination of proven European features, coupled with many innovative product improvements instituted by Parker Hannifin.
Today, the Ferulok fitting design and performance capabilities far exceed the strict requirements of SAE and military standards. The Ferulok fitting is a flareless fitting that consists of a body, a one-piece precision machined ferrule, and a nut. On assembly, the ferrule "bites" into the outer surface of the tube with sufficient strength to hold the tube against pressure, without significant distortion of the inside tube diameter. The ferrule also forms a pressure seal against the fitting body. Ferulok fittings allow the fitting assembler to visually inspect the bite quality, thus significantly minimizing the risk of improper assembly and related service problems. Ferulok fittings are especially suitable for use with tube wall thicknesses ranging from medium to extra heavy.
Ferulok’s robust construction and proven sealing characteristics have gained it worldwide popularity in diverse markets and applications. Ferulok fittings are routinely used in markets, such as: Machine tools, chemical, military, oil refineries, paper making, thermoplastics processing, etc.
FF Series Couplings are non-spill, push-to-connect quick disconnects designed for use in the construction and utility markets. The push-to-connect sleeve allows one handed connection and features a locking mechanism to prevent accidental disconnection. The flush face design eliminates hydraulic spillage and air inclusion when connecting and disconnecting. Anti-blowout seal on the male half prevents damage and premature failure with residual system pressure. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free).
FH Series Couplings are high pressure, non-spill, push-to-connect quick couplings. The coupler has a sleeve locking mechanism to prevent accidental disconnection. The flush face design eliminates hydraulic spillage and air inclusion when connecting and disconnecting. Anti-blowout seal on the male half prevents damage and premature failure. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Sleeve and nipple body have a red finish for easy identification. Standard seal material is nitrile.
Available in 3/8” body size only with female pipe thread (NPTF) and male pipe thread (NPTF) as standard end configurations.
Meets the performance and dimensional requirements of HTMA specifications. FH series couplings are NOT interchangeable with low pressure flush face couplings.
The QA and QD Series, Flow Controls are designed for applications such as spreaders
where precise control of one or two functions may be required without regard to variations
in load pressure. These valves are used mainly on snow removal equipment, but can also be
used for other applications such as sand and fertilizer. Features
In 1995, Parker became one of the first to successfully market the concept of a portable particle counter, the PLC-2000. Since then, Parker has grown into the industry leader for condition monitoring products. A variety of both proven and leading-edge products are now available for applications in both the industrial and mobile marketplace.
Why on-site fluid condition monitoring?
• Certification of fluid cleanliness levels • Early warning tool to help prevent catastrophic failures in critical systems • Immediate results with laboratory accuracy • To comply with customer cleanliness requirements and specifications • New equipment warranty compliance • New oil cleanliness testing • Identification of a fluid's saturation point and/or water content • Continuous monitoring for water contamination
Diagnostic Fluid Sampling Test Port Couplings are designed to provide an easy access point for obtaining fluid samples. A permanently mounted test point should be installed in either low-pressure or return lines. This eliminates the need to shut down or break lines when taking samples and reduces the chances of contamination.
FS Series Couplings are non-spill, push-to-connect quick disconnects designed for use with chemicals, food processing, and corrosive applications. The push-to-connect sleeve allows one handed connection. The flush face design eliminates hydraulic spillage and air inclusion when connecting and disconnecting. Bodies are constructed of stainless steel, type 316 with fluorocarbon seals.
Available in body sizes 1/4" through 1" with female pipe thread (NPT), male pipe thread (NPTF), and female straight thread (ORB) as standard end configurations.
Parker gas bottles reduce initial hydraulic system costs and interface well with our accumulator products, especially piston accumulators. The bottles are made of heavy duty forged construction and are offered in a broad range of sizes and operating pressures.
HF Series Couplers [Industrial Interchange] are general purpose, single shut off, push-to-connect, quick disconnects. The push-to-connect sleeve allows one handed connection. Couplers are brass with stainless steel locking balls and valve spring. Standard seals are nitrile.
Body sizes are 1/8" through 1/2" with female pipe thread (NPTF) and male pipe thread (NPTF) end configurations. 1/4" and 3/8" are available in a heavy duty version with heat treated steel bodies and sleeves.
1/4" , 3/8", and 1/2" HF series couplers connect with Industrial Interchange Nipples.
1/8" HF couplers have no standard industry interface and will connect with an 1/8" HF nipple only.
Advantages No flaring, soldering or other preparation of tubing is necessary. Pre-assembled fitting, with sleeve machined onto nut. This two piece flareless compression design is available in a broad selection of configurations from 1/8" through 5/8" OD. tube size.
Applications Use with copper, brass, seamless steel and thermoplastic tubing for instrumentation systems, farm and mobile construction equipment, hydraulic and pneumatic controls, process control systems and laboratory equipment. Steel tubing must be cold drawn and annealed seamless low-carbon steel tubing per SAE J524 with a maximum hardness of Rockwell B 65. Brass insert 63PT is recommended for use with thermoplastic tubing.
Working Pressure Range Up to 4,300 psi depending on tubing being used
Assembly Instructions 1. Cut tube squarely and cleanly removing all burrs. 2. Grasp fitting. Do not remove nut. 3. Insert tube in fitting through nut until tube seats firmly against tube shoulder in body. 4. Grip tube firmly to prevent turning and tighten nut to finger-tight. Continue to tighten nut for one and three-quarter additional turns (one and one-half turns for 1/2" size tube fittings) for a positive, leak proof seal. During tightening a slight "give" will be felt. This "give" indicates the sleeve has been sheared from the nut. It is not necessary to tighten the n
HO Series Couplings are high flow, non-valved, quick disconnects for high pressure applications. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. The coupler has a sleeve locking mechanism to prevent accidental disconnection. Couplings are steel with electroless nickel plating. Standard interface seal material is nitrile.
HO series body sizes are 1/4" through 1/2" with female pipe thread (NPSF) as the standard end configuration.
Advantages All Parker hose barb fitting pipe threads are made to Dryseal standards. Connectors, unions, nuts and extended elbows and tees are machined from CA 360 and CA 345 brass.
Temperature and Working Pressure Ranges From -40° to +160°F. at 150 PSI maximum.
Note: These fittings are intended for use with 97HC hose clamp, similar type clamp or a crimped ferrule.
Assembly Instructions 1. Cut hose cleanly and squarely to length. 2. Slide clamp on hose. 3. Lubricate hose. Push hose on fitting until hose bottoms against stop ring or hex. 4. Position hose clamp as shown below and secure with a screwdriver or wrench. Maintain “A” dimension noted below for proper clamp positioning
Hose Barb (HB) Series Fittings
Parker HB Fittings is a multi-barb hose fitting designed for low pressure applications. HB Fittings is used on general purpose, pneumatic, and low pressure hose and require a wormdrive style clamp.
HP Series Couplings are general purpose, double shut off, quick disconnects with operating pressures up to 5000 PSI. They have poppet valves and manual sleeves. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). The coupler sleeve and nipple body are hardened to withstand pressure surges and pulses. Available in body sizes 1" and 1-1/2" with female pipe thread (NPTF, NPSF) and female straight thread (ORB) as standard end configurations.
HY Series Fittings
Parker HY Series Fittings is a permanent (crimp) style fitting which permits quick assembly with our family of Parker crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. HY Series Fittings has Chromium-6 free plating and are used with Parker Hydraulic/Braided Hoses.
Parker Crimpsource™
Crimpsource enable you to choose your crimpers and select the hose, fittings, and current crimping specifications needed to make hose assemblies. You can even print a simple-to-follow data specification sheet. Crimpsource includes hydraulic rubber hose, industrial hose, and thermoplastic hose products, and contains all the crimp specifications approved for Parker crimpers.
Parker’s hydro-pneumatic accumulators regulate the performance of a hydraulic system by providing an additional volume of system fluid, pressurized by an external gas supply.
A correctly specified accumulator can:
In industrial applications, three types of hydro-pneumatic accumulators are widely used – the piston type, bladder type and diaphragm type. Each has particular advantages and limitations which should be considered when selecting an accumulator for a specific application.
MASTER HYDRUALIC FITTINGS CATALOG
The four-bolt flange is a proven leak-free connection, especially suited for larger sizes. As a result, it has achieved worldwide acceptance. The connection's success is in its simplicity. It is a static face seal using a high durometer O-ring for the seal and clamps and bolts for the holding power.
This simple design provides several advantages over threaded port connections, such as NPT, SAE, BSPP, ISO 6149, etc., in larger sizes:
The connection has one disadvantage - it requires a larger area (footprint) on the component than an equivalent threaded port.
Parker offers over 30 different 4-bolt flange series and over 20 different flange head series. This represents over 1200 standard part numbers available to provide the best possible plumbing solution. The vast majority of our flanges are manufactured from forged steel with a limited amount machined from bar stock. The forged construction provides higher strength and durability to provide long lasting performance in the application.
Contaminated oil is drawn into the Parker Portable Purification System (PVS) by a vacuum of 25 In/Hg. The oil passes through the in-line low watt density heater where the oil is heated to an optimum temperature of 150° F (66°C).
The oil then enters the distillation column where it is exposed to the vacuum through the use of special dispersal elements. This increases the exposed surface area of the oil and converts the water to vapor form, which is then drawn through the condenser by the vacuum pump.
The water-free oil falls to the bottom of the column and is removed by a heavy duty lube oil pump. This pump forces the dry oil through a final particulate removal filter. Clean oil passes out of the unit, back to the reservoir — and into the system.
Parker Filtration’s Hydraulic Filter Division engineered the 18/28/38P series of high pressure filters to satisfy demanding applications in the mobile and industrial markets throughout the world. With metric mounting and optional ISO 6149 ports, this new series is truly a global design.
Installed downstream of the pump, this new series with their wide range of high capacity Microglass III elements, offer excellent protection to system components.
Standard filters come complete with industry proven spool type bypass valve. For more critical applications such as servo or proportional controls, a no bypass high strength element combination ensures maximum protection.
The modular low hysteresis differential pressure indicator fitted to this series is unrivaled in its performance. Tests prove it’s accuracy and foolproof design to be a major advance in indicator technology.
Parker offers a variety of accessories, including pumps, valves, and switches, which help increase precision and performance of your hydraulic and pneumatic systems.
The industry’s widest selection of inline mounted valves come from Parker. Our valves are used in a virtually limitless range of applications – from air and fuel systems to load holding. Our valves use a variety of media including oil, air, water, and Skydrol, and are made from materials such as aluminum, stainless steel, brass, and carbon steel. They employ economical metal seating or zero-leak seating with elastomer seals.
Parker Hydraulic Valve Division is a dynamic supplier of integrated manifold systems. Our products, engineering expertise and manufacturing excellence make us the logical single source for your industrial hydraulic system needs. And with our qualified factory support and large sales network, choosing components, kits and systems has never been easier. With such benefits as vendor reduction, application engineering, cost reduction, innovative designs, and state-of-the-art technology, you will have everything you need right at your fingertips.
Parker Industrial Interchange Nipples are for use with any 20 Series, 30 Series, E-z-mate, HF Series, and Universal Coupler. They also interchange with nipples from other quick coupling manufacturers conforming to MIL-C4109 or ANSI/(NFPA) T3.20.14-1990.
Parker offers a wide selection of manifold valves including directional control, sandwich, proportional directional, proportional pressure, and servovalves. With markets ranging from machine tools, power generation, and materials testing to mining, oil, gas and simulation applications, Parker manifold valves offer a superior combination of options, performance, and reliability.
The need for an economical, medium pressure range filter with excellent fatigue pressure ratings has been met. Parker's CN Series filters are the common factor for a long list of applications requiring economical filtration. Prior to the availability of the CN Series filter, many applications were restricted by limitations of a spin-on can, or forced into the higher cost range of high pressure filters.
The CN Series fills this gap, and now with the newly increased fatigue rating from 550 to 800 psi, the applications are expanded. The CN Series has recently been improved to accept Ecoglass III coreless elements.
Ecoglass III represents the merging of high performance filtration technology with environmentally conscious engineering. The Ecoglass III line of replacement elements feature 100% non-metallic construction. The design reduces solid waste and minimizes disposal costs for industry. The non-metallic construction means lightweight elements (60% less weight) for easier servicing.
The Ecoglass III elements utilize the same proprietary media design as our Microglass III line of replacement elements. With Ecoglass III, a reusable core is installed into the filter housing and remains in service throughout the life of the assembly.
Noise pollution is the hottest topic in the hydraulic industry today. Lab tests show that pump noise levels are increased by 2-3 dB(A) just by adding 12 feet of outlet and return lines. The lines do not generate noise. They radiate noise when they respond to pulsations or vibrations. The pulsations are usually generated by the pump, and the vibrations are radiated by large flat machine surfaces.
The Inline Pulse-Tone Hydraulic Shock Suppressor reduces pump pulsations and shock. When you stop pulsation and vibration, you stop the cause of component wear and leakage. A power unit with an Inline Pulse-Tone installed can operate at higher RPM with smaller, less expensive components...and less noise.
IL8 series filters are excellent choices for your demanding applications whether you require simplex, duplex or quadplex assemblies.
Wherever high flow or high capacity filters are required, the IL8 series can be applied with confidence. Filter housings have a simple yet critical job... securely contain the filter element with positive internal sealing.
The IL8 series filter housings are the result of careful engineering. High grade materials are used to provide strength at critical stress points.
The cover and base are annodized aluminum, the handle is nickel plated ductile iron and the bowl is rugged carbon steel. The result is a reliable high performance filter for an array of applications.
When you need finished Integrated Hydraulic Circuits with extremely short lead times, the Parker Speed Shop is the place to go. Parker’s expert application engineers, along with the latest computer-aided design and manufacturing technology, can bring new and advanced custom products to market faster, keeping you way ahead of your competition.
Advantages Built to resist mechanical pullout. This economical fitting can be assembled and disassembled repeatedly. Readily available in a broad selection of styles to fill your specific needs. Manufactured from CA 360 or CA 345 brass.
Specifications Listed with Underwriter’s Laboratories for flammable liquid and gas . Meets functional requirements of SAE, J512, ASA and MS (Military Standards). Refer to list of UL listed fittings on page 6 for specific configurations.
Applications Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Manufactured especially for hard-to-hold liquids and gases.
Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73°F with copper tubing:
PSI TUBE TUBE O.D. (IN.) WALL (IN.) 2800 1/8 .030 1900 3/16 &#
These cylinders are designed to meet the requirements of ISO 6020/2 (1991), 160 Bar Compact Series. HMI Series cylinders may be used for working pressures up to 210 Bar and are available with 12 standard mounting styles and seal types to fit a wide variety of operating environments.
Advantages To simplify the installation of hydraulic and pneumatic systems, Parker supplies a range of ISO Port Adapters for various sizes of metric threads and end configurations. Theses adapters include NPTF, flare, hose barb and NTA end configurations. Fluorocarbon o-rings are standard on all ISO adapters.
Specifications Meets dimensional requirements of ISO 6149-3 and SAE 2244-3.
Applications Use with brass, copper or J844 type A & B nylon tubing. Manufactured for low and medium pressure line connection work.
Working Pressure and Temperature Ranges Dependent on tubing or hose end connection
Japanese Industrial Standard (JIS) fittings were introduced by Parker in North America in the early 1990s to address market requirements for OEM and replacement JIS fittings.
The JIS fittings are designed with 30° male flare and 30° female seats and each incorporate BSP (British Standard Pipe) threads. These fittings are typically utilized as hose adapters on equipment designed and/or manufactured in Japan and Korea.
Fluid contamination can lead to high maintenance costs and downtime in hydraulic systems. KleenVent reservoir isolators provide protection against the ingestion of airborne contaminants – dust, chemicals, and water vapor – into your hydraulic system though the reservoirs breather-vent. By using an elastomer bladder as a lung, the changes in gas volume in a hydraulic system’s reservoir can be trapped and prevented from mixing with the outside atmosphere. And unlike conventional breathervent filters, KleenVent reservoir isolators provide a positive separation without the possibility of clogging or need for maintenance.
Click on the Load and Motor Control Valve products to learn more.
MPD series filters are an outstanding choice for today’s demanding hydraulic control and circulating oil systems. The MPD’s innovative modular design, rugged ductile iron construction and coreless element technology, combined with many other features, provide solutions across a broad range of industrial applications.
The Modular design provides user flexibility for simplex or duplex applications. Incorporating side chambers as simplex filters along with duplex installations provide common elements across the circuit design.
Construction features like full ported transfer valve with neutral center flow capability offer tremendous benefit in cold start conditions. Standard features like pressure sensing taps, vents, drains and internal pressure equalization make this product incomparable in industry.
Advantages To simplify the installation of pneumatic systems, Parker supplies a comprehensive range of adapters for NPT, BSPP, and BSPT pipe threads. Pipe nipples, pipe connectors, reducing connectors, pipe thread reducers, bulkhead female unions, elbows, tees, crosses and hex head plugs. Parker brass adapters are produced from forgings and extrusions to meet exacting requirements. The hot forging process increases the density of the material, refines the grain structure and improves material strength.
Applications Use with brass, copper, or iron pipe. Manufactured for low- and medium-pressure line connection work.
Working Pressure and Temperature Ranges From -65° to +250° at 1000 psi.
Vibration Fair resistance to vibration and pipe movement depending upon conditions.
Learn more about Parker's Heavy Duty Mill Hydraulic Cylinder:
Advantages The Parker Mini-Valve is to be used in confined and hard to reach applications. The Brass extruded body allows for extended service life and is chrome plated as standard. Features of the MV608/609 valves include blowout proof stem, hard chrome plate ball, PTFE seats, Viton® stem seals, and standard yellow handle. MV200 valve features a black lever handle. This economical ball valve is available in 1/8",1/4”, 3/8” and 1/2” sizes.
Applications Parker’s industrial ball valve product line is intended for general purpose use. Please be aware that ball valves are intended for use in the fully open or closed positions. Depending on application conditions, throttling of the valve may result in premature seal failure and/or inability to turn the valve handle. For use on water and air service lines on capital equipment and plant design plumbing that require total shutoff capability.
Working Pressure and Temperatures These valves are designed and built for use at pressures and temperatures within the stated ranges. Consult the factory for any use outside of these ranges.
Parker's Mold Coolant Couplings are specifically designed for connecting coolant lines to molds and dies on injection molding machinery.
Advantages Parker Needle Valves have metal-to-metal seats, with finethread screwdown. This enables positive sealing up to the capacity of the valve
Working Pressure and Temperature Valves are designed to withstand up to 150 PSI working pressure, unless otherwise noted. See specific part number for temperature range.
Needle Valves Installation Instructions Series NV valves should always be installed with the pressure against the seat. Refer to drawing to determine correct direction of flow.
The Hydraulic Accumulator Division of Parker Hannifin continually designs and develops innovative solutions to meet its customer needs. Click on any of the above products to learn more.
Parker's Non-Spill Adapters were designed to convert between poppet style (Parker 6600 Series) couplings and non-spill type (Parker FE Series - ISO 16028 standard) couplings in the construction market. Bodies are steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in 1/2" body size, flush valve to poppet or poppet to flush valve options.
NS Series Couplings are non-spill, push-to-connect quick disconnects for use in the construction and utility markets. The push-to-connect sleeve allows one handed connection and features a locking mechanism to prevent accidental disconnection. The flush valve design minimizes hydraulic spillage and air inclusion when connecting and disconnecting. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in body sizes 3/8" through 1" with female pipe thread (NPSF), female straight thread
An extensive range of competitively priced Parker quality replacement filter elements, Par-Fit interchange elements allow the users to acquire all their replacement elements from one quality source regardless of the original equipment manufacturer.
Par-Fit competitive interchange elements must conform to all the same rigorous tests as the standard Parker replacement elements. The elements meet or exceed all specifications for the following tests:
In addition to price and quality, the range of interchange elements available is key to a successful program for the user. Parker has worked diligently over the years to develop a range of elements that will meet this challenge.
PD Series Quick Couplings provide easy connection for gauges and SensoControl diagnostic equipment. Flush face poppet valves minimize air inclusion and spillage, provide easy to clean surfaces, and help to prevent contamination.
Couplers are steel, nipples are steel or brass. PD couplers have male or female pipe thread (NPTF) ends. Nipples are available with female pipe thread (NPTF), male pipe thread (NPTF), metric, straight thread (ORB), O-ring face seal, 37 degree flare, Triple-Lok, and bulkhead end configurations. A stainless steel coupling is available with 1/4" NPTF thread ends.
PD nipples are designed to meet or exceed SAE J1502 and ISO 15171-1 design and performance specifications.
Parker's PDP Series Couplings are designed to connect gauges and diagnostic equipment easily and quickly under full system pressure up to 6,000 PSI (operating).
PDP couplers and nipples push-to-connect with a constant force of six pounds. Then the coupler base is turned to open the valve and complete the connection. In the connected position, the coupler base blocks the retracting sleeve to prevent accidental disconnects.
Coupler and nipple bodies are steel. Nipples are available with male pipe thread (NPTF), male straight thread (ORB), Triple-Lok, and Seal-Lok end configurations.
Parker's PF Series Couplings are thermoplastic, non-spill quick disconnects that are designed for use in closed system transfer and for the dispensing of chemicals with minimal environmental contamination. The push-to-connect design allows ease of connection/disconnection, and the flush valving enables ease of cleaning. PF series couplings are constructed of glass filled polypropylene.
Available in body sizes 1/2", 1", and 2" with female pipe thread (NPT) as the standard end configuration. 1" body size nipples have NPS and modified buttress thread tank mount options.
Platinum Cured Silicone Products
As a compliment to our successful Fluoropolymer and Sanitary Food Grade Hoses, PARKER/PAGE has expanded its hose and tubing line to include Platinum cured Silicone Products. These high quality hoses continue our tradition of total customer satisfaction. PARKER/PAGE Fluoropolymer and Platinum Cured hoses meet or exceed the following requirements:
-FDA 21 CFR 177.1550, 177.2600 -UPS XXIII Class VI Requirements -European Pharmacopoeia 3.1.9 -ISO 10993 Sections 5, 6 10, 11 -USDA Standards -3A Standards
Advantages Compact design features internal nitrile seals and a one-piece extruded brass body, offering compatibility with a wide range of media. The onepiece stem/handle combination is constructed of glass reinforced acetal copolymer. Parker plug valves feature 1/4 turn shutoff allowing for ease of operation. All plug valves are 100% leak tested and are certified to be leak free to one SCCM.
Materials Extruded Bodies: CA 360 Stem/Handle: Acetal Copolymer O-Rings: Nitrile (other compounds available) Stop Pin: 420SS Spiral Ring: 302SS
Temperature and Working Pressure Ranges From -40° to +175°F at 250 PSI maximum.
Applications Manufactured for use with air, water, oil and certain other fluids. Contact factory for special fluid requirements
Installation Instructions To assure sealability and reliable performance, the valve must be installed so that the flow media travels in the direction of the arrow on the valve handle.
Advantages Patented design of sizes 5/32" and above meet SAE J2494 and D.O.T. FMVSS 571.106 air brake performance specifications.. No special tools are needed to assemble. Just bottom the tubing in the fitting body for a positive seal. Stainless steel tube support in sizes 1/4” and above assures maximum flow and performance requirements of SAE J1131. 1/8” Prestomatic† is designed for use in pressure proteced air accessory lines that are isolated from the air brake system.
Application Use with Parker Parflex SAE J844 type A & B nylon tubing. Designed for all D.O.T. truck and trailer applications. Consult the factory with any questions regarding special product applications. Prior to use, all applications should be carefully tested through the range of conditions which may be encountered.
Features 1. All brass body. 2. Stainless steel tube support assures maximum flow and performance characteristics. 3. Elbows and tees are available in swivel or rigid dryseal pipe threads. Swivels are designed for alignment purposes only. 4. Lubricated O-Ring Seal (Buna N) insures a quick, easy and positive seal. 5. Innovative Collet design insures positive grip on tubing. 6. Release Button offers quick and easy disconnections.
Technical Data • Working pressure from vacuum to 250 psi.
Advantages Patented design of sizes 6mm and above meet DIN 74324 and D.O.T. FMVSS 571.106 air brake performance specifications. No special tools are needed to assemble. Just bottom the tubing in the fitting body for a positive seal.
Application Use with DIN 73378 virgin nylon or SAE J1394 tubing. Designed for DIN and D.O.T. truck and trailer applications. Consult the factory with any questions regarding special product applications. Prior to use, all applications should be carefully tested through the range of conditions which may be encountered.
Features 1. All brass body. 2. Stainless steel tube support 3. Elbows and tees utilize the Universal Stud HOBS nut design. 4. Lubricated O-Ring Seal (Buna N) insures a quick, easy and positive seal. 5. Innovative Collet design insures positive grip on tubing. 6. Release Button offers quick and easy disconnections.
Technical Data • Working pressure up 250 psi. • Working temperature from -40° F to +200°F (Note: see tubing manufacturer’s recommendations for pressure and temperature limitations). • Buna N (Nitrile) O-Rings. • DIN 74324: Air brake systems thermoplastic tubes and pipe requirements and testing • DIN 73378: Polymade tubing for motor vehicles.
PRESTOWELD 2 - TUBING CATALOG
Main characteristics
Prestoweld 2 tubing is made of weld spark resistant Polyurethane and therefore the ideal solution for water and air supply of welding robots. Prestoweld 2 guarantees a simple, fast and reliable assembly without additional tools.
Family
Polyurethane Tubing
Proportional flow control valves provide pseudo pressure compensation and are used on systems requiring variable electronic control of flow. They allow the operator to vary the control signal to accelerate or decelerate an actuator. A compensator valve can be added to the circuit for enhanced compensation. Some typical applications would include the hoist control for a lift, or the speed control for a winch circuit. Parker offers both normally closed and normally open versions of proportional flow controls.
Parker's PS Series Swivels are designed to meet the application needs and performance requirements of the market. Pressure capabilities up to 5000 PSI, 1/4" through 2" body sizes, a variety of port options, and zinc with clear trivalent chromate (hexachromium free) plating. PS series swivels are available with in-line and 90 degree configurations.
RF Series Couplings are general purpose, push-to-connect, quick disconnects with increased flow capabilities. The push-to-connect sleeve allows one handed connection. Coupler bodies are brass with nickel plated steel sleeves. Nipples are case hardened steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in body sizes 1/4" and 3/8" with female pipe thread (NPSF), male pipe thread (NPTF), standard and Push-Lok hose barb end configurations.
RF nipple flow area is up to 2-1/2 times greater than standard Industrial Interchange nipples.
1/4" body size interchanges with Rectus 25 and CEJN 32
The S Series Swivel product line complements the Quick Coupling Division's PS Series swivel line by offering a pressure balanced, compact forged body design. As a result of the pressure balanced design, the S Series Swivel does not experience a significant increase in torque as pressure rises. The housing body is forged and case hardened to provide superior performance and durability in tough applications. This product is great for eliminating hose twist, torque and stress caused by the movement of the hydraulic components where side load to the swivel can be minimized.
The Seal-Lok fitting is the Tube Fittings Division’s most recently developed fitting. It was introduced in an effort to eliminate leakage in hydraulic systems and allow higher operating pressures.
The Seal-Lok fitting is an O-ring face seal type fitting that consists of a nut, a fitting body, an O-ring and a sleeve.
A flat face sleeve is flanged or brazed to the tube and when the fitting is assembled, it compresses an O-ring in a precision machined groove in the fitting body to form a leak tight seal. Seal-Lok fittings are suitable for any range of tube wall thick-ness and are also readily adaptable to pipe, metric tubing and hose. The Seal-Lok connection can be made with either metric or inch tubing by choosing the appropriate sleeve.
There are over thirty different body shapes and straights to choose from for specific applications. The body face has a groove which contains a high durometer O-ring that is held captive during installation. In addition, the Seal-Lok fitting body shapes are forged for added strength and longer service life. Straight products are made from cold drawn barstock. The cold drawing process ensures consistent dimensional tolerances, improved strength and better surface finish. Seal-Lok fittings are manufactured with a captive O-ring groove (CORG) design for prevention of O-ring fall-out prior to final assembly.
Seal-Lok fittings meet or exceed all requirements of SAE J1453 and are approved by DET Norske Veritas for use in hydraulic systems up to size 38mm O.D. (1 1/2") as shown on certificate P-9538.<
Economical, high quality brass drain cocks are available with either external or internal seats. Economical shutoff cocks are manufactured for extra strength.
Working Pressure Drain Cocks -- to 150 PSI Shutoff Cocks -- to 30 PSI Temperature Range +32º to +125ºF
SM Series Couplings are general purpose, double shut off, quick disconnects that can be used in a wide spectrum of applications. They have poppet valves and manual sleeves. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Available in body sizes 1/4", 1/2", and 3/4" with pipe thread (NPTF), straight thread (ORB), and British pipe (BSPP) as standard end configurations.
Parker's SpectrumTM Series couplers are the most advanced engineered thermoplastic couplings available. SpectrumTM Series couplings combine compact size, high flow capability, and light weight design to meet a broad range of coupling applications. Three material combinations allow the couplings to beused in markets as diverse as chemical processing, automation equipment, semi-conductor and food processing. Spectrum Series can be used in many applications previously reserved for stainless steel couplings. Additional features include: convenient push-to-connect design, a wide range of port options, and modular design.
ST Series Couplings are high flow, non-valved, quick disconnects for applications where maximum flow is required. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. Couplings are available in steel, brass, and 303 type stainless steel. ST series body sizes are 1/8" through 1-1/2" with female pipe thread (NPTF) and male pipe thread (NPTF) as standard end configurations.
ST series couplings are interchangeable with similar couplings made by other manufacturers.
The Cast Body is manufactured from CF-8M Stainless Steel, the cast equivalent of 316 Stainless Steel. They are ideal for corrosive environments such as chemical plants and refineries. The full flow design assures maximum operating efficiency. The reinforced PTFE seats and seals, coupled with the 316 Stainless Ball and blow-out proof stem, result in the utmost reliability.
Applications/Approvals The industrial ball valve product line is intended for general purpose use. Please be aware that ball valves are intended for use in the fully open or closed positions. Depending on application conditions, throttling of the valve may result in premature seal failure and/or inability to turn the valve handle.
Applications include chemical plants, refineries, steel mills, industrial fuel lines and agricultural equipment. Meets material requirements of NACE MR-01-75.
Sizes 3/4" - 2" (Panel Mount Style Standard on 1/4" - 1/2" sizes) Working Pressure to 2000 PSI (3/4" - 1") to 1500 PSI (1-1/4" - 2") to 150 PSI saturated steam Temperature Range 0º to +400ºF
Parker's Stainless Steel Hydraulic Cylinders offer a 316 stainless steel, extruded design with a range of bore sizes, stroke up to 72", and a wide selection of options to meet specific operating needs. The cylinder's construction provides superior corrosion resistance for greater durability in harsh environments.
TC Series Couplings are high pressure, quick couplings with a manual ball locking sleeve. The coupler has a sleeve locking mechanism to prevent accidental disconnection. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Standard seal material is fluorocarbon.
Available in 3/8” body size only with female pipe thread (NPSF) as the standard end configuration.
HIGH PRESSURE HYDRAULIC HOSE CATALOG
High Pressure for service use with petroleum or synthetic hydraulic fluids in hydraulic sytems, as well as machine tools, agricultural machinery, hydraulic tools, clamps and gas applications.
High Pressure Hydraulic Hoses
MASTER HOSE CATALOG
Parker Tie Rod Hydraulic Cylinders are available in a range of bore sizes for medium and heavy duty service. Each series offers a range of mounting options, superior performance, and durability.
Use the comparison chart and click below on any of the products for more information.
Series
Bore
Stroke Range**
Max Pressure
Type
2H
1-1/2" - 6"
Tool-Mate Couplers (PBS) are non-marring, exhaust style couplers with push-to-connect action. Couplers are constructed of Polyamide material with stainless steel springs, and balls. Locking fingers are made of Polyacetate. The black colored body designates exhaust style, venting coupler.
Available in body sizes 1/4" through 1/2" with female pipe thread (NPTF) and male pipe thread (NPTF) end configurations.
Tool-Mate PBS couplers accept Industrial Interchange nipples and are identified with a yellow band on the body.
Tool-Mate Couplers (PES) are non-marring, exhaust style couplers with push-to-connect action. Couplers are constructed of Polyamide material with stainless steel springs, and balls. The black colored body designates exhaust style, venting coupler.
Available in 1/4" body size with female pipe thread (NPTF) and male pipe thread (NPTF) end configurations.
Tool-Mate PES couplers accept Parker's high flow RF nipples and are identified with a green band on the body.
Tool-Mate Couplers (PBH) are non-marring, standard style, single shut-off couplers with push-to-connect action. Couplers are constructed of Polyamide material with stainless steel springs, balls, and pins. Locking fingers are made of Polyacetate. The grey colored body designates standard, non-venting style coupler.
Available in body sizes 1/4" and 3/8" with female pipe thread (NPTF) and male pipe thread (NPTF) end configurations.
Tool-Mate PBH couplers accept Industrial Interchange nipples and are identified with a yellow band on the body.
Tool-Mate Couplers (PER) are non-marring, standard style, single shut-off couplers with push-to-connect action. Couplers are constructed of Polyamide material with stainless steel springs, balls, and pins. Locking fingers are made of Polyacetate. The grey colored body designates standard, non-venting style coupler.
Tool-Mate PER couplers accept Parker's RF nipples and are identified with a green band on the body.
Parker’s Triple-Lok 37° flare tube fittings have been used in industry since Mr. Parker pioneered the product in the 1930s. The 37° flare fitting is the most popular industrial tube/hose fitting connection in the world.
Today, Parker offers a broad range of Triple-Lok fittings meeting SAE J514, ISO 8434-2 and military standards and specifications.
The Triple-Lok design is quite simple. The tube fitting consists of three pieces: the body, the nut and the sleeve. The tube end is flared at a mating 37° angle and sandwiched between the fitting nose (seat) and the sleeve creating an effective seal between the fitting nose and tube flare or hose.
Parker’s Triple-Lok fittings are manufactured in steel, 316 stainless steel and brass for optimum fluid compatibility and corrosion resistance. Furthermore, available sizes range from 1/8" tube O.D. to 2" tube O.D. in several configurations. Adaptability to global ports is another key benefit of Triple-Lok. (Standard ports include: SAE, straight thread ISO-6149, NPT, BSPT, BSPP and DIN.)
The Triple-Lok tube fitting is also readily available for metric tubing and hose adapter applications. Simply by changing the industry standard sleeve, the same Triple-Lok body can be adapted to metric tubing in sizes ranging from 6 mm tube O.D. to 38 mm tube O.D. Likewise, by using only the body without the nut and sleeve, the Triple-Lok fitting is used as an industry standard hose adapter.
Parker-Tube Fittings Division hand tube cutters are designed to make uniform clean square cuts easier and with the least possible burrs. Hand Tube Cutters use a built-in deburring blade on each cutter for removal of any I.D. burrs.
Tube Cutters, Saw Vise and Deburr Tool
Twist-Lock Series Couplers are general purpose, single shut off, push-to-connect quick couplings that are interchangeable with Schrader Twist-Lock style couplings. Couplers lock at connection to prevent accidental disconnection. Sleeve must be turned to unlock and allow the nipple to be released. Coupler bodies are zinc. Nipple bodies and sleeves are steel with zinc and clear trivalent chromate plating (hexachromium free). Standard seals are nitrile.
Available in 1/4” and 1/2" body sizes with female pipe thread (NPTF), male pipe thread (NPTF), and standard hose barb end configurations.
Parker's Two-Way Valves are designed for use in air or liquid service. Bodies are constructed of molded polypropylene with brass and stainless steel valving. Nitrile seals are standard. Available with forward positioned lever, reverse oriented lever, or push button style valve actuation.
UC Series Universal Coupler is a general purpose, single shut-off, push-to-connect coupler that permits connection with three nipple styles. Industrial Interchange, 10 series (Tru-Flate), and 50 series (ARO 210) nipples will connect with the Universal Coupler. Coupler material is brass with standard nitrile seals.
Available in 1/4" body size with female pipe thread (NPSF) and male pipe thread (NPTF) end configurations.
Even though the UC coupler will connect with different style nipples, to achieve the best coupling performance it is advised to match like series couplers and nipples.
Advantages Vibra-Lok provides a positive reliable seal under vibration conditions, mechanical shock or tube movement. The sleeve cushions the tubing permitting the tube to flex back and forth in the fitting. Seal design compensates for tube mis-alignment and tube surface defects during assembly. Special Vibra-Lok sleeves resist deterioration and retain flexibility over a wide temperature range. Positive nut stop bottoms nut on body requiring only visual inspection — no torque measurement is needed. Manufactured from CA 360, CA 345 or CA 377 brass. With SAE straight threads on Vibra-Lok fittings this allows the fitting to adhere to the system design requirements outlined in the Genuine Parker Parts Program making it an approved product under GPP.
Applications Use with all seamed or seamless metal tubing: Copper, Aluminum, Steel (Bundy), Stainless Steel and Glass. Sleeves are compatible for gasoline, oil, diesel fuel, lubricants, vacuum, air and water service.
Threads SAE J1926 straight threads and NPTF pipe threads are standard. Optional threads include ISO 6149 straight threads and British pipe threads.
Working Pressures See table on next page for maximum working pressures.
Temperature Ranges Fitting will withstand various temperatures depending on the sleeve used in the
1163 Series Water Service Couplings are high flow, non-valved, quick disconnects for water hoses. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. Couplings are brass and stainless steel construction with nitrile interface seals.
1163 series is available in 3/4" body size with female garden hose thread (NH) on the coupler and male garden hose thread (NH) on the nipple.
Parker’s KLS/KLT Tank Top Return Line Filters are ideally suited for Mobile and Industrial high-to-medium flow return applications, from 30 to 120 GPM. This cost-effective, in-tank filter series provides maximum flow and dirt holding capacity for longer filter element life in a simple, easy-to-install-and-service assembly.
The generous element size with extensive media area ensures continuous filtration during cold start up conditions. The inside-to-out flow path with closed bottom provides additional assurance that all contaminants remain captured during element service removal.
The filters have a pressure rating of 150 psi static and a temperature range of -40˚F to 225˚F and are available in a wide range of high-efficiency Microglass III media in 2, 5, 10 and 20 micron for all system cleanliness requirements. Bypass valves are built into the element to ensure further performance integrity. A new bypass is provided with each element change.
This rugged design meets the needs for the demanding applications in mobile off-highway and on-highway applications for construction equipment, logging, refuse vehicles, mining, oil and gas recovery, marine, and industrial power units.
Parker engineers have developed an innovative alternative to the age old spin-on style can. This new design provides all of the benefits of high efficiency, long life Ecoglass III filtration, without the environmental impact.
The new environmentally-friendly 12AS and 50AS hydraulic filters feature a reuseable bowl and a patented filter element constructed primarily of nylon and fiberglass. The element core is permanently attached as part of the filter bowl. When replaced, the element reduces costs, eliminates hot drain requirements, can be easily incinerated, and is better-suited for most landfills.
The 500 psi filters are rated up to 50 gpm, with premium Ecoglass III elements as standard offerings. The patented element design also prevents filter operation if the proper element is not in place.
10 Series Couplings are general purpose, single shut off, manual sleeve, quick disconnects. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. The standard 1/4" 10 series features a brass coupler with a steel valve. Larger sizes include an all steel construction with brass also available. Standard seals are nitrile.
Body sizes are 1/4" through 1/2" with female pipe thread (NPTF), male pipe thread (NPTF), and standard and Push-Lok hose barb end configurations.
10 series couplings are the original Tru-Flate design.
1141 Series Couplings are high pressure, screw to connect, quick couplings where both halves are brought together with a threaded sleeve. Coupling bodies are stainless steel (303) and the coupler has a brass sleeve. Polyurethane seals are standard. Dust caps and plugs are included with the couplers and nipples.
Available in 1/4” body size only with female pipe thread (NPTF) as the standard end configuration.
Parker No-Skive 20 Series Fittings is a field attachable (reusable) style fitting which permits quick, easy field assembly without special tools. Assembly of No-Skive hose and fittings does not require removal of outer cover of hose. This eliminates premature hose failure caused by skiving too long or short. 20 Series Fittings has zinc dichromate plating and are used on Parker 201-261, 206, 221FR, 225, 235, 266, SS25UL Hoses - the Parker Engine_Airbrake_Marin
20 Series Couplers [Industrial Interchange] are general purpose, single shut off, manual sleeve, quick disconnects. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. The standard 1/4" 20 series features a brass coupler with a steel valve. Larger sizes include an all steel construction with brass also available. Standard seals are nitrile.
20 series couplings connect with Industrial Interchange Nipples.
21 Series Fittings
Parker No-Skive 21 Series Fittings is a field attachable (reusable) style fitting which permits quick, easy field assembly without special tools. Assembly of No-Skive hose and fittings does not require removal of outer cover of hose. This eliminates premature hose failure caused by skiving too long or short. 21 Series Fittings has zinc dichromate plating and are used on Parker 213, 285, 293 Hoses - the Parker Engine_Airbrake_Marine_Gas Hoses.
22 Series Fittings
Parker No-Skive 22 Series Fittings is a 3 piece mandrel style field attachable (reusable) style fitting which permits quick, easy field assembly without special tools. Assembly of No-Skive hose and fittings does not require removal of outer cover of hose. This eliminates premature hose failure caused by skiving too long or short. 22 Series Fittings has zinc dichromate plating and are used on Parker with 201-261, 206, 221FR, 225, 235, 266, SS25UL Hoses - Park
23 Series Fittings
Parker No-Skive 23 Series Fittings is a 3-piece mandrel style field attachable (reusable) fitting which permits quick, easy field assembly without special tools. Assembly of No-Skive hose and fittings does not require removal of outer cover of hose. This eliminates premature hose failure caused by skiving too long or short. 23 Series Fittings has zinc dichromate plating and are used on Parker 213, 285, 293 Hoses - the Parker Engine_Airbrake_Marine_Gas Hoses.
26 Series Fittings
Parker 26 Series Fittings is a permanent (crimp) style fitting which permits quick assembly with our family of Parker crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 26 Series Fittings has zinc dichromate plating and are used with 201-261, 206, 213, 221FR, 225,
30 Series Fittings
Parker No-Skive 30 Series Fittings is a field attachable (reusable) style fitting which permits quick, easy field assembly without special tools. Assembly of No-Skive hose and fittings does not require removal of outer cover of hose. This eliminates premature hose failure caused by skiving too long or short. 30 Series Fittings has zinc dichromate plating and are used with 301, 381 Hoses - the Parker Hydraulic/Braided Hoses.
30 Series Couplers [Industrial Interchange] are general purpose, single shut-off couplers. The pawl locking mechanism allows a simple push-to-connect operation. Couplers have brass bodies and steel valves. Standard seal material is nitrile.
Body sizes are 1/4" through 3/4" with female pipe thread (NPTF), male pipe thread (NPTF), and standard and Push-Lok hose barb end configurations.
30 series couplers connect with Industrial Interchange Nipples.
Protective Dust Caps and Plugs play a crucial role in the life of a quick coupling.
3000 Series Couplings are high pressure, screw to connect, quick couplings where both halves are brought together with a threaded sleeve. The coupler and nipple have ball valves. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Coupler has a polyurethane interface seal.
Available in body sizes 1/4" and 3/8" with female and male pipe thread (NPTF) as standard end configurations.
400 Series Blow Guns have an epoxy coated zinc body and are available in lever or push button styles.
Controlled pressure models meet the requirements of OSHA directive #100-1 and have vented nozzles to prevent pressure build up when dead heading occurs (up to 150 PSI).
Full pressure models do NOT meet OSHA requirements.
4000 Series Couplings are general purpose, double shut off, quick disconnects. They are available with poppet or ball valves. The manual sleeve requires two-handed operation to retract the sleeve for connection or disconnection. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Critical coupling components are hardened for durability. Available in 1/4" through 1" body sizes with female pipe thread (NPTF) and straight thread (ORB) as standard end configurations. 1/2" body size includes female BSPP as a standard end configuration.
42 Series Fittings
Parker No-Skive 42 Series Fittings is a field attachable (reusable) style fitting which permits quick, easy field assembly without special tools. Assembly of No-Skive hose and fittings does not require removal of outer cover of hose. This eliminates premature hose failure caused by skiving too long or short. 42 Series Fittings has zinc dichromate plating and are used with 421, 431, 436, 482TC, 482ST Hoses - the Parker Hydraulic/Braided Hoses.
4200 Series Couplings are general purpose, double shut off, quick disconnects. They are available with poppet or ball valves. The double acting sleeve allows one handed push-to-connect operation when the coupler is clamp or bulkhead mounted. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Critical coupling components are hardened for durability. Available in 3/8" and 1/2" body sizes with female pipe thread (NPTF) and straight thread (ORB) as standard end configurations.
43 Series Fittings
Parker 43 Series Fittings is a Parkrimp permanent (crimp) style fitting which permits quick assembly with our family of Parkrimp crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 43 Series Fittings has Chromium-6 free plating and are used with Parker Hydraulic Braided, Light Spiral, Specialty, Suction and Return Hoses.
Advantages This economical fitting resists mechanical pullout. Can be assembled and disassembled repeatedly. Manufactured from CA 360, CA 345 or CA 377 brass.
Specifications Listed with Underwriter’s Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards). Refer to list of UL listed fittings on page 8 for specific configurations.
PSI TUBE TUBE O.D.(IN.) WALL (IN.) 2800 1/8 .030 1900 3/1 .030 1400 1/4 .030 1200 5/16 .032 1000 3/8 &
50 Series Couplings are general purpose, single shut off, manual sleeve, quick couplings that are interchangeable with ARO’s 210 series.
HA Series Couplings are general purpose, single shut off, push-to-connect, quick couplings that are interchangeable with ARO’s 210 series.
5000 Series Couplers are connect under pressure, where the connection is made first and then a wrench is used to turn the coupler valve body, which opens the coupler and nipple valves to allow flow through the coupling. To disconnect, the valve body must first be backed out to close the valves and allow the coupler sleeve to be retracted. Coupler bodies are steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in 1/2" body size only with female pipe thread (NPTF) as the standard end configuration. The 5000 series coupler connects with Parker 8010 nipples (ISO 5675) with ball valves.
The Parker 5000 series coupler can be used for applications that require connection under pressure and where tools can be used to make the connection.
60 Series Brass Couplings are double shut-off couplings with a double O-ring interface seal. The locking balls are stainless steel and the standard seal material is Nitrile. They have poppet valves and manual sleeves.
Available in body sizes 1/8" through 2-1/2". Standard end configuration is female pipe thread (NPTF). Seal options are ethylene propylene, fluorocarbon, and neoprene.
60 Series Couplings comply with industry standard ISO 7241, Series B.
60 Series Steam Couplings are brass, double shut-off couplings with a double O-ring interface seal. The seal material is ethylene propylene for temperatures up to 400 degrees F. Couplings have poppet valves and manual sleeves.
Available in body sizes 1/4" through 1". Standard end configuration is female pipe thread (NPTF). A grip ring sleeve is standard on the 3/8 inch size.
60 Series Steel Couplings are general purpose, double shut-off couplings. Plating is zinc with clear trivalent chromate (hexachromium free). Standard seal material is Nitrile. They have poppet valves and manual sleeves.
Available in body sizes 1/8" through 2-1/2". Standard end configurations are female pipe thread (NPTF) and female straight thread (ORB). Seal options are ethylene propylene, fluorocarbon, and neoprene.
60 Series Stainless Steel (303) Couplings are general purpose, double shut-off couplings. The valving and locking balls are also stainless steel. Standard seal material is Nitrile. They have poppet valves and manual sleeves.
60 Series Stainless Steel (316) Couplings are general purpose, double shut-off couplings. The valving and locking balls are also stainless steel. Standard seal material is fluorocarbon. They have poppet valves and manual sleeves.
Available in body sizes 1/8" through 2-1/2". Standard end configurations are female pipe thread (NPTF) and female straight thread (ORB). Seal options are ethylene propylene, nitrile, and neoprene.
6100 Series Couplings are connect under pressure, non-spill, quick couplings where both halves are brought together in a threaded connection with either a wing nut or hex nut sleeve. The flush valves keep air inclusion and spillage to a minimum while the bonded valve seal allows full pressure connect and disconnect without seal washout. Coupling bodies are brass and the sleeves are steel. Optional flange is available for bulkhead mounting.
Available in body sizes 3/4" through 1-1/2" with female pipe thread (NPTF) as the standard end configuration.
6600 Series Couplings are general purpose, double shut off, quick disconnects that can be used in a wide spectrum of applications. They have poppet valves and manual sleeves. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). The coupler sleeve and nipple body are hardened to resist damage from Brinelling and mechanical shock. Available in body sizes 1/4" through 1" with pipe thread (NPTF) and straight thread (ORB) as standard end configurations.
6600 Series Couplings comply with industry standard ISO 7241-1, Series A.
70 Series Couplings are general purpose, single shut off, manual sleeve, quick couplings that are interchangeable with Lincoln "long stem" couplings. The manual ball locking mechanism requires two-handed operation to retract the sleeve for connection or disconnection. Couplers have a tubular valve for maximum flow and a built-in sleeve guard to minimize accidental disconnection. Coupler bodies are brass with steel valves and standard nitrile seals. Nipples are steel with zinc and clear trivalent chromate plating (hexachromium free).
Available in 1/4” body size with female pipe thread (NPTF) and male pipe thread (NPTF) end configurations.
70 Series Fittings
Parker 70 Series Fittings is a Parkrimp permanent (crimp) style fitting which permits quick assembly with our family of Parkrimp crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 70 Series Fittings has zinc dichromate plating and are used with 701 Hose - a Parker Hydraulic Spiral Hose.
71 Series Fittings
Parker 71 Series Fittings is a Parkrimp permanent (crimp) style fitting which permits quick assembly with our family of Parkrimp crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 71 Series Fittings has Chromium-6 free plating and are used with Parker Hydraulic Spiral Hose.
73 Series Fittings
Parker 73 Series Fittings is a Parkrimp permanent (crimp) style fitting which permits quick assembly with our family of Parkrimp crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 73 Series Fittings has zinc dichromate plating and are used with 731 Hose - Parker Hydraulic Spiral Hose.
78 Series Fittings
Parker 78 Series Fittings is a Parkrimp permanent (crimp) style fitting which permits quick assembly with our family of Parkrimp crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 78 Series Fittings has zinc dichromate plating and are used with 781, 782ST, 782TC, 78C Hose - Parker Hydraulic Spiral Hose.
79 Series Fittings
Parker 79 Series Fittings is a Parkrimp permanent (crimp) style fitting which permits quick assembly with our family of Parkrimp crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 79 Series Fittings has zinc dichromate plating and are used with 792ST , 792TC Hose - Parker Hydraulic Spiral Hose.
Parker 8010 Nipples meet ISO 5675 requirements. Body material is steel with zinc and clear trivalent chromate plating (hexachromium free). Available in 1/2" body size only with female pipe thread (NPTF) and female straight thread (ORB) as standard end configurations. 8010 nipples are available with either ball or poppet style valves. For applications with residual trapped pressure, a connect-under pressure nipple (-DC) is an option.
81 Series Fittings
Parker 81 Series Fittings is a two (2) piece permanent (crimp) style fitting which permits quick assembly with the Parker family of crimpers. Assembly of No-Skive hose and fittings does not require removal of the outer cover of the hose. This eliminates premature hose failure caused by skiving too long or short. 81 Series Fittings include both the 88 Series Fittings and the 10081 shell. 81 Series Fittings have zinc dichromate plating and are used with 811 and 881 Hose - Parker Hydraulic Suction and Return Line Hose.
82 Series Fittings
Parker No-Skive 82 Series "Push-Lok®" Fittings is a 1-piece field attachable (reusable) push-on style fitting which permits quick, easy field assembly without special tools. Assembly of 82 Series No-Skive hose and fittings does not require a clamp. 82 Series Fittings are available in brass or steel with zinc dichromate plating and are used with 801, 804, 821, 821FR, 831,
8200 Series Couplings are connect under pressure, double shut off, quick disconnects. They have poppet valves designed to permit connection while either or both the coupler and nipple are under pressure. The double acting sleeve allows one handed push-to-connect operation when the coupler is clamp or bulkhead mounted.
Coupling bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Critical coupling components are hardened for durability. Available in 1/2" body size only with female pipe thread (NPSF) and female straight thread (ORB) as standard end configurations.
The 8200 series coupler connects with Parker 8010 nipples (ISO 5675) with either ball or poppet style valves.
88 Series Fittings
Parker No-Skive 88 Series Fittings is a 1-piece field attachable (reusable) clamp style fitting which permits quick, easy field assembly without special tools. Assembly of 88 Series No-Skive hose and fittings requires a wormdrive or deadbolt clamp, depending on the working pressure. 88 Series Fittings has zinc dichromate plating and are used with 811, 881 (88HC), 881 Hoses - Parker Suction and Return Hydraulic Hoses.
Note: Parker No-Skive 88 Series Fittings are used with 10081 Shells for crimp (permanent) style hose assemblies.
9200 Series Couplers are connect under pressure, quick disconnects. They are designed with a lever operated cam that opens and closes the valves in both coupling halves. This allows the coupling to be easily connected and disconnected while under pressure. The positive lock of the cam prevents flow checking from hydraulic surges.
Coupler bodies are steel with zinc and clear trivalent chromate plating (hexachromium free). Critical coupling components are hardened for durability. Available in 1/2" body size only with female pipe thread (NPTF) and female straight thread (ORB) as standard end configurations.
The 9200 series coupler connects with Parker 8010 nipples (ISO 5675) with either ball or poppet s
