Please wait. Catalogs are being retrieved...

ACCESS VALVES

ACCESS VALVES
 
    

Advantages
Access Valves are designed to offer convenient low cost access ports
for Refrigeration service. All Access Valves feature 1/4" SAE male flare
access ports and are furnished with a finger tight quick seal cap. For
greater flexibility, all Tees and Crosses are machined to receive an
access core in all 1/4" SAE flare ends. This allows for 2 or more access
connections in one fitting plus greater flexibility in the positioning of the
valves. All Access Valves with pipe connections have internal ODS
solder cups so that these valves may be installed in either of 2 ways.

Applications
Access Valves may be installed in any position on either high or low
side for quick testing, pressure checking, purging or charging.

Valve Bodies
Straight Access Valve bodies are manufactured from brass rod CA360
or CA345. Shaped Access Valve bodies are manufactured from brass
forge rod CA377. All Access Valve bodies are machined in accordance
with ARI standard 720.

Valve Core
Parker valve cores meet ARI standard 720 and are designed for use
with all florocarbon refrigerants such as R-12,R-22 and R-502, R-134a
and are resistant to oils, alkalies and dilute mineral acids.

Working Pressure and Temperature Ranges
Up to 500 PSI
-20°F to +220°F


 
Display Page 1 of 2 1 2 next >

AVCS4D SWIVEL CROSS

AVC1 FORGED MALE CROSS

AVE1 FORGED MALE ELBOW

AVTS SOLDER TEE

AVTSL EXTENDED SOLDER TEE

AVTS4 FORGED FEMALE RUN SWIVEL TEE

AVTS6 FORGED FEMALE BRANCH SWIVEL TEE

AVT2 FORGED UNION TEE

AVT3 FORGED MALE RUN TEE

AVUR3 FEMALE CONNECTOR

AVUS STRAIGHT SOLDER CONNECTOR

AVUSE EXTENDED COPPER TUBE

AVUS3 3 WAY SOLDER CONNECTOR

AVUS3BH BULKHEAD SOLDER UNION

AVUS4D SWIVEL CONNECTOR

AVU1 MALE CONNECTOR

AVU1F1 MALE CONNECTOR WITH STRAIGHT THREAD PORT

AVU2 FULL UNION

AVU2BH BULKHEAD UNION

CR CORE REMOVER
Display Page 1 of 2 1 2 next >