Please wait. Catalogs are being retrieved...

HOSE BARB

HOSE BARB
 
    

Advantages
All Parker hose barb fitting pipe threads are made to Dryseal standards.
Connectors, unions, nuts and extended elbows and tees are
machined from CA 360 and CA 345 brass.

Temperature and Working Pressure Ranges
From -40° to +160°F. at 150 PSI maximum.

Note: These fittings are intended for use with 97HC hose clamp, similar
type clamp or a crimped ferrule.

Assembly Instructions
1. Cut hose cleanly and squarely to length.
2. Slide clamp on hose.
3. Lubricate hose. Push hose on fitting until hose bottoms against stop
   ring or hex.
4. Position hose clamp as shown below and secure with a screwdriver
   or wrench. Maintain “A” dimension noted below for proper clamp
   positioning


 
Display Page 1 of 2 1 2 next >

122HBL HOSE MENDER

125HBL HOSE BARB/MALE PIPE

125HBLSV MALE SWIVEL HOSE BARB

126HBL HOSE BARB/FEMALE PIPE

127HB BALL-END JOINT ADAPTER/MALE PIPE

128HBLSV HOSE BARB/SWIVEL FEMALE BALL-END

129HB HOSE BARB ELBOW/MALE PIPE

1295HB HOSE BARB ELBOW/SAE STRAIGHT THREAD

139HB HOSE BARB 45 DEGREE ELBOW/MALE PIPE

146HBLFSV HOSE BARB/SWIVEL 45 FEMALE FLARE

169HB-X-MIX BEADED ELBOW/METRIC STRAIGHT THREAD

1695HB BEADED ELBOW/SAE STRAIGHT THREAD

171HB HOSE BARB TEE/MALE PIPE

1725HB HOSE BARB TEE/SAE STRAIGHT THREAD

179HB BEADED 45 ELBOW/MALE PIPE

179HB-X-MIX BEADED 45/METRIC STRAIGHT THREAD

1795HB BEADED 45/SAE STRAIGHT THREAD

269HB BEADED 90 ELBOW/MALE PIPE

279HB BEADED 45 EXTRUDED ELBOW/MALE PIPE

68HB BEADED HOSE BARB/MALE PIPE
Display Page 1 of 2 1 2 next >